Search the Community

@RockBianthanks for the suggestion. My armbianEnv.txt has a few more things in it, but those lines do already exist. /var/log/alternatives.log { monthly rotate 12 compress delaycompress missingok notifempty create 644 root root } verbosity=7 console=serial earlycon=on extraargs=ignore_loglevel earlyprintk usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u rootdev=UUID=a58334e6-208e-452f-b332-c0907a96f03f rootfstype=ext4

Hi All, I ran Armbian at orangepi r1 plus. Details: Firstly, OrangePi R1 Plus is booted with Armbian_21.02.3_Nanopi-r2s_buster_current_5.10.21. But I got the error: Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. done. Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! UUID=1430eaac-3ff0-465a-a7b0-66b51608ccd1 does not exist. Dropping to a shell! (initramfs) All Boot Output: https://pastebin.pl/view/c23b4566 After that, Orange Pi R1 Plus is successfully booted with Orangepir1plus_2.1.0_debian_buster_server_linux5.8.18. I inserted another sd card (it has Armbian_21.02.3_Nanopi-r2s_buster_current_5.10.21 image) to the R1 Plus and mounted. I copied /boot/dtb/rockchip/rk3328-orangepi-r1plus.dtb and paste into the sd card. I changed /boot/armbianEnv.txt as follows: # more /boot/armbianEnv.txt verbosity=1 bootlogo=false overlay_prefix=rockchip fdtfile=rockchip/rk3328-orangepi-r1plus.dtb rootdev=UUID=1430eaac-3ff0-465a-a7b0-66b51608ccd1 rootfstype=ext4 console=serial usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u Orange Pi R1 Plus is booted. But it has some issues. The device did not detect 2nd ethernet and first ethernet is not working properly. Orange Pi R1 Plus Armbian Boot Output: https://pastebin.pl/view/ba0f9789 I will work on it.

Hello, I just stumbled upon this topic, after I spend few hours trying to run the current Armbian (buster) I downloaded from the Sopine64 Product page. I got the same error: Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. done. Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! UUID=b9866ace-f260-437c-9794-8e1a363a3c71 does not exist. Dropping to a shell! (initramfs) The UUID in the armbianEnv.txt did match, so my conclusion is, that there is something wrong with the current linked image. I have a Pine64 LTS which is identical with the Sopine board. Downloading the Armbian_20.11.7 image did solve my problems.

thanks for your fast reply @lanefu!! I have this extra info. I am surprised bc it seems that the initial config want to expose 640x480 (without doing it manually) but something disallow it. if its a soc limitation that could be resolved by software (kernel dev) or not I need to know it. oh, it says fb. maybe I should try the other one.. how i switch to that one? also, do you know how to shift to gbm from x11? i mean on rpi4 we can just do ctrl plus F4. maybe there is a way to trigger something similar. usually gbm its a better performing environment for certain opengl apps. pi@rockpi-4b:~$ cat /var/log/Xorg.0.log [ 19.350] X.Org X Server 1.20.9 X Protocol Version 11, Revision 0 [ 19.350] Build Operating System: Linux 4.15.0-130-generic aarch64 Ubuntu [ 19.350] Current Operating System: Linux rockpi-4b 5.10.21-rockchip64 #21.02.3 SMP PREEMPT Mon Mar 8 01:05:08 UTC 2021 aarch64 [ 19.350] Kernel command line: root=UUID=f43869ab-391c-4c4b-98c0-2663c796d171 rootwait rootfstype=ext4 bootsplash.bootfile=bootsplash.armbian console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=1 ubootpart=b2f51975-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u,0x1058:0x25a2:u cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 [ 19.351] Build Date: 17 January 2021 09:13:31AM [ 19.351] xorg-server 2:1.20.9-2ubuntu1.2~20.04.1 (For technical support please see http://www.ubuntu.com/support) [ 19.351] Current version of pixman: 0.38.4 [ 19.351] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 19.351] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 19.351] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 25 00:49:01 2021 [ 19.365] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 19.365] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 19.374] (==) No Layout section. Using the first Screen section. [ 19.374] (==) No screen section available. Using defaults. [ 19.374] (**) |-->Screen "Default Screen Section" (0) [ 19.374] (**) | |-->Monitor "<default monitor>" [ 19.375] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 19.375] (**) Option "BlankTime" "0" [ 19.375] (**) Option "StandbyTime" "0" [ 19.375] (**) Option "SuspendTime" "0" [ 19.375] (**) Option "OffTime" "0" [ 19.375] (==) Automatically adding devices [ 19.375] (==) Automatically enabling devices [ 19.375] (==) Automatically adding GPU devices [ 19.375] (==) Automatically binding GPU devices [ 19.376] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 19.404] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 19.405] Entry deleted from font path. [ 19.405] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 19.405] Entry deleted from font path. [ 19.405] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 19.405] Entry deleted from font path. [ 19.405] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist. [ 19.405] Entry deleted from font path. [ 19.405] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 19.405] Entry deleted from font path. [ 19.405] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 19.405] Entry deleted from font path. [ 19.405] (==) FontPath set to: /usr/share/fonts/X11/misc, built-ins [ 19.405] (==) ModulePath set to "/usr/lib/xorg/modules" [ 19.405] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 19.405] (II) Loader magic: 0xaaaab6928010 [ 19.405] (II) Module ABI versions: [ 19.405] X.Org ANSI C Emulation: 0.4 [ 19.405] X.Org Video Driver: 24.1 [ 19.405] X.Org XInput driver : 24.1 [ 19.405] X.Org Server Extension : 10.0 [ 19.409] (++) using VT number 7 [ 19.409] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 19.410] (II) xfree86: Adding drm device (/dev/dri/card0) [ 19.417] (II) xfree86: Adding drm device (/dev/dri/card1) [ 19.418] (II) no primary bus or device found [ 19.418] falling back to /sys/devices/platform/display-subsystem/drm/card0 [ 19.418] (II) LoadModule: "glx" [ 19.427] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 19.513] (II) Module glx: vendor="X.Org Foundation" [ 19.513] compiled for 1.20.9, module version = 1.0.0 [ 19.513] ABI class: X.Org Server Extension, version 10.0 [ 19.513] (==) Matched modesetting as autoconfigured driver 0 [ 19.513] (==) Matched fbdev as autoconfigured driver 1 [ 19.513] (==) Assigned the driver to the xf86ConfigLayout [ 19.513] (II) LoadModule: "modesetting" [ 19.514] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 19.532] (II) Module modesetting: vendor="X.Org Foundation" [ 19.532] compiled for 1.20.9, module version = 1.20.9 [ 19.532] Module class: X.Org Video Driver [ 19.532] ABI class: X.Org Video Driver, version 24.1 [ 19.532] (II) LoadModule: "fbdev" [ 19.532] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 19.542] (II) Module fbdev: vendor="X.Org Foundation" [ 19.542] compiled for 1.20.1, module version = 0.5.0 [ 19.542] Module class: X.Org Video Driver [ 19.542] ABI class: X.Org Video Driver, version 24.0 [ 19.542] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 19.542] (II) FBDEV: driver for framebuffer: fbdev [ 19.567] (II) modeset(0): using drv /dev/dri/card0 [ 19.567] (WW) Falling back to old probe method for fbdev [ 19.567] (II) Loading sub module "fbdevhw" [ 19.567] (II) LoadModule: "fbdevhw" [ 19.567] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 19.576] (II) Module fbdevhw: vendor="X.Org Foundation" [ 19.576] compiled for 1.20.9, module version = 0.0.2 [ 19.576] ABI class: X.Org Video Driver, version 24.1 [ 19.577] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 19.577] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 19.577] (==) modeset(0): RGB weight 888 [ 19.577] (==) modeset(0): Default visual is TrueColor [ 19.577] (II) Loading sub module "glamoregl" [ 19.577] (II) LoadModule: "glamoregl" [ 19.577] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 19.647] (II) Module glamoregl: vendor="X.Org Foundation" [ 19.647] compiled for 1.20.9, module version = 1.0.1 [ 19.647] ABI class: X.Org ANSI C Emulation, version 0.4 [ 21.125] (II) modeset(0): glamor X acceleration enabled on Mali T860 (Panfrost) [ 21.126] (II) modeset(0): glamor initialized [ 21.151] (II) modeset(0): Output HDMI-1 has no monitor section [ 21.177] (II) modeset(0): EDID for output HDMI-1 [ 21.177] (II) modeset(0): Manufacturer: GSM Model: 5a24 Serial#: 2339 [ 21.177] (II) modeset(0): Year: 2016 Week: 4 [ 21.177] (II) modeset(0): EDID Version: 1.3 [ 21.177] (II) modeset(0): Digital Display Input [ 21.177] (II) modeset(0): Max Image Size [cm]: horiz.: 48 vert.: 27 [ 21.177] (II) modeset(0): Gamma: 2.20 [ 21.177] (II) modeset(0): DPMS capabilities: StandBy Suspend Off [ 21.177] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 21.177] (II) modeset(0): First detailed timing is preferred mode [ 21.178] (II) modeset(0): redX: 0.638 redY: 0.334 greenX: 0.309 greenY: 0.627 [ 21.178] (II) modeset(0): blueX: 0.153 blueY: 0.073 whiteX: 0.313 whiteY: 0.329 [ 21.178] (II) modeset(0): Supported established timings: [ 21.178] (II) modeset(0): 720x400@70Hz [ 21.178] (II) modeset(0): 640x480@60Hz [ 21.178] (II) modeset(0): 640x480@75Hz [ 21.178] (II) modeset(0): 800x600@56Hz [ 21.178] (II) modeset(0): 800x600@60Hz [ 21.178] (II) modeset(0): 800x600@75Hz [ 21.178] (II) modeset(0): 832x624@75Hz [ 21.178] (II) modeset(0): 1024x768@60Hz [ 21.178] (II) modeset(0): 1024x768@75Hz [ 21.178] (II) modeset(0): 1280x1024@75Hz [ 21.178] (II) modeset(0): 1152x864@75Hz [ 21.178] (II) modeset(0): Manufacturer's mask: 0 [ 21.178] (II) modeset(0): Supported standard timings: [ 21.178] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 21.178] (II) modeset(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281 [ 21.178] (II) modeset(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129 [ 21.178] (II) modeset(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 21.178] (II) modeset(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 21.178] (II) modeset(0): #5: hsize: 1400 vsize 1050 refresh: 60 vid: 16528 [ 21.178] (II) modeset(0): #6: hsize: 1600 vsize 900 refresh: 60 vid: 49321 [ 21.178] (II) modeset(0): #7: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 21.178] (II) modeset(0): Supported detailed timing: [ 21.178] (II) modeset(0): clock: 148.5 MHz Image Size: 477 x 268 mm [ 21.178] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 21.179] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 21.179] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz [ 21.179] (II) modeset(0): Monitor name: 22MP55 [ 21.179] (II) modeset(0): Serial No: [ 21.179] (II) modeset(0): Supported detailed timing: [ 21.179] (II) modeset(0): clock: 27.0 MHz Image Size: 160 x 90 mm [ 21.179] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0 [ 21.179] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0 [ 21.179] (II) modeset(0): Number of EDID sections to follow: 1 [ 21.179] (II) modeset(0): EDID (in hex): [ 21.179] (II) modeset(0): 00ffffffffffff001e6d245a23090000 [ 21.179] (II) modeset(0): 041a010380301b78ea6275a3554fa027 [ 21.179] (II) modeset(0): 125054a76b80714f81c0810081809500 [ 21.179] (II) modeset(0): 9040a9c0b300023a801871382d40582c [ 21.179] (II) modeset(0): 4500dd0c1100001e000000fd00384b1e [ 21.179] (II) modeset(0): 530f000a202020202020000000fc0032 [ 21.179] (II) modeset(0): 324d5035350a202020202020000000ff [ 21.179] (II) modeset(0): 000a2020202020202020202020200101 [ 21.179] (II) modeset(0): 02031b61230907078301000067030c00 [ 21.179] (II) modeset(0): 2000802d43908402e2000f8c0ad08a20 [ 21.179] (II) modeset(0): e02d10103e9600a05a00000000000000 [ 21.179] (II) modeset(0): 00000000000000000000000000000000 [ 21.179] (II) modeset(0): 00000000000000000000000000000000 [ 21.179] (II) modeset(0): 00000000000000000000000000000000 [ 21.179] (II) modeset(0): 00000000000000000000000000000000 [ 21.179] (II) modeset(0): 00000000000000000000000000000029 [ 21.180] (--) modeset(0): HDMI max TMDS frequency 225000KHz [ 21.180] (II) modeset(0): Printing probed modes for output HDMI-1 [ 21.180] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 21.180] (II) modeset(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e) [ 21.180] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 21.180] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 21.180] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 21.180] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 21.180] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 21.180] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 21.180] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 21.180] (II) modeset(0): Output HDMI-1 connected [ 21.180] (II) modeset(0): Using exact sizes for initial modes [ 21.180] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +0+0 [ 21.180] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 21.180] (==) modeset(0): DPI set to (96, 96) [ 21.180] (II) Loading sub module "fb" [ 21.180] (II) LoadModule: "fb" [ 21.181] (II) Loading /usr/lib/xorg/modules/libfb.so [ 21.185] (II) Module fb: vendor="X.Org Foundation" [ 21.185] compiled for 1.20.9, module version = 1.0.0 [ 21.185] ABI class: X.Org ANSI C Emulation, version 0.4 [ 21.185] (II) UnloadModule: "fbdev" [ 21.185] (II) Unloading fbdev [ 21.186] (II) UnloadSubModule: "fbdevhw" [ 21.186] (II) Unloading fbdevhw [ 21.323] (==) modeset(0): Backing store enabled [ 21.323] (==) modeset(0): Silken mouse enabled [ 21.333] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. [ 21.334] (==) modeset(0): DPMS enabled [ 21.334] (II) modeset(0): [DRI2] Setup complete [ 21.334] (II) modeset(0): [DRI2] DRI driver: rockchip [ 21.334] (II) modeset(0): [DRI2] VDPAU driver: rockchip [ 21.334] (II) Initializing extension Generic Event Extension [ 21.334] (II) Initializing extension SHAPE [ 21.334] (II) Initializing extension MIT-SHM [ 21.335] (II) Initializing extension XInputExtension [ 21.336] (II) Initializing extension XTEST [ 21.336] (II) Initializing extension BIG-REQUESTS [ 21.336] (II) Initializing extension SYNC [ 21.337] (II) Initializing extension XKEYBOARD [ 21.337] (II) Initializing extension XC-MISC [ 21.337] (II) Initializing extension SECURITY [ 21.337] (II) Initializing extension XFIXES [ 21.338] (II) Initializing extension RENDER [ 21.338] (II) Initializing extension RANDR [ 21.338] (II) Initializing extension COMPOSITE [ 21.339] (II) Initializing extension DAMAGE [ 21.339] (II) Initializing extension MIT-SCREEN-SAVER [ 21.339] (II) Initializing extension DOUBLE-BUFFER [ 21.339] (II) Initializing extension RECORD [ 21.340] (II) Initializing extension DPMS [ 21.340] (II) Initializing extension Present [ 21.340] (II) Initializing extension DRI3 [ 21.340] (II) Initializing extension X-Resource [ 21.341] (II) Initializing extension XVideo [ 21.341] (II) Initializing extension XVideo-MotionCompensation [ 21.341] (II) Initializing extension SELinux [ 21.341] (II) SELinux: Disabled on system [ 21.341] (II) Initializing extension GLX [ 21.595] (II) AIGLX: Loaded and initialized rockchip [ 21.595] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 21.595] (II) Initializing extension XFree86-VidModeExtension [ 21.596] (II) Initializing extension XFree86-DGA [ 21.596] (II) Initializing extension XFree86-DRI [ 21.597] (II) Initializing extension DRI2 [ 21.602] (II) modeset(0): Damage tracking initialized [ 21.602] (II) modeset(0): Setting screen physical size to 508 x 285 [ 21.768] (II) config/udev: Adding input device dw_hdmi (/dev/input/event0) [ 21.768] (**) dw_hdmi: Applying InputClass "libinput keyboard catchall" [ 21.768] (II) LoadModule: "libinput" [ 21.769] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 21.779] (II) Module libinput: vendor="X.Org Foundation" [ 21.779] compiled for 1.20.4, module version = 0.29.0 [ 21.779] Module class: X.Org XInput Driver [ 21.779] ABI class: X.Org XInput driver, version 24.1 [ 21.779] (II) Using input driver 'libinput' for 'dw_hdmi' [ 21.779] (**) dw_hdmi: always reports core events [ 21.779] (**) Option "Device" "/dev/input/event0" [ 21.779] (**) Option "_source" "server/udev" [ 21.797] (II) event0 - dw_hdmi: is tagged by udev as: Keyboard Pointingstick [ 21.798] (II) event0 - dw_hdmi: device is a pointer [ 21.798] (II) event0 - dw_hdmi: device is a keyboard [ 21.799] (II) event0 - dw_hdmi: device removed [ 21.840] (II) libinput: dw_hdmi: needs a virtual subdevice [ 21.840] (**) Option "config_info" "udev:/sys/devices/platform/ff940000.hdmi/rc/rc0/input0/event0" [ 21.840] (II) XINPUT: Adding extended input device "dw_hdmi" (type: MOUSE, id 6) [ 21.841] (**) Option "AccelerationScheme" "none" [ 21.841] (**) dw_hdmi: (accel) selected scheme none/0 [ 21.841] (**) dw_hdmi: (accel) acceleration factor: 2.000 [ 21.841] (**) dw_hdmi: (accel) acceleration threshold: 4 [ 21.843] (II) event0 - dw_hdmi: is tagged by udev as: Keyboard Pointingstick [ 21.843] (II) event0 - dw_hdmi: device is a pointer [ 21.843] (II) event0 - dw_hdmi: device is a keyboard [ 21.867] (**) dw_hdmi: Applying InputClass "libinput keyboard catchall" [ 21.867] (II) Using input driver 'libinput' for 'dw_hdmi' [ 21.867] (**) dw_hdmi: always reports core events [ 21.867] (**) Option "Device" "/dev/input/event0" [ 21.867] (**) Option "_source" "_driver/libinput" [ 21.867] (II) libinput: dw_hdmi: is a virtual subdevice [ 21.867] (**) Option "config_info" "udev:/sys/devices/platform/ff940000.hdmi/rc/rc0/input0/event0" [ 21.867] (II) XINPUT: Adding extended input device "dw_hdmi" (type: KEYBOARD, id 7) [ 21.867] (**) Option "xkb_model" "pc105" [ 21.867] (**) Option "xkb_layout" "latam" [ 21.867] (**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp" [ 25.340] (II) modeset(0): EDID vendor "GSM", prod id 23076 [ 25.340] (II) modeset(0): DDCModeFromDetailedTiming: 720x480 Warning: We only handle separate sync. [ 25.340] (II) modeset(0): Using EDID range info for horizontal sync [ 25.340] (II) modeset(0): Using EDID range info for vertical refresh [ 25.340] (II) modeset(0): Printing DDC gathered Modelines: [ 25.340] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 25.340] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 25.341] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 25.341] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 25.341] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 25.341] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 25.341] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 25.341] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 25.341] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 25.341] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 25.341] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 25.341] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 25.341] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 25.341] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 25.341] (II) modeset(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [ 25.341] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 25.341] (II) modeset(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [ 25.341] (II) modeset(0): Modeline "1400x1050"x0.0 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e) [ 25.341] (II) modeset(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e) [ 25.341] (II) modeset(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 25.342] (--) modeset(0): HDMI max TMDS frequency 225000KHz [ 28.119] (II) modeset(0): EDID vendor "GSM", prod id 23076 [ 28.119] (II) modeset(0): DDCModeFromDetailedTiming: 720x480 Warning: We only handle separate sync. [ 28.119] (II) modeset(0): Using hsync ranges from config file [ 28.119] (II) modeset(0): Using vrefresh ranges from config file [ 28.119] (II) modeset(0): Printing DDC gathered Modelines: [ 28.119] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 28.119] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 28.119] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 28.120] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 28.120] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 28.120] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 28.120] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 28.120] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 28.120] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 28.120] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 28.120] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 28.120] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 28.120] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 28.120] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 28.120] (II) modeset(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [ 28.120] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 28.120] (II) modeset(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [ 28.120] (II) modeset(0): Modeline "1400x1050"x0.0 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e) [ 28.120] (II) modeset(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e) [ 28.120] (II) modeset(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 28.121] (--) modeset(0): HDMI max TMDS frequency 225000KHz [ 28.157] (II) modeset(0): EDID vendor "GSM", prod id 23076 [ 28.157] (II) modeset(0): DDCModeFromDetailedTiming: 720x480 Warning: We only handle separate sync. [ 28.157] (II) modeset(0): Using hsync ranges from config file [ 28.157] (II) modeset(0): Using vrefresh ranges from config file [ 28.157] (II) modeset(0): Printing DDC gathered Modelines: [ 28.157] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP) [ 28.157] (II) modeset(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 28.157] (II) modeset(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 28.157] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 28.158] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 28.158] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 28.158] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 28.158] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 28.158] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 28.158] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 28.158] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 28.158] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 28.158] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 28.158] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 28.158] (II) modeset(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [ 28.158] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 28.158] (II) modeset(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [ 28.158] (II) modeset(0): Modeline "1400x1050"x0.0 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e) [ 28.158] (II) modeset(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e) [ 28.158] (II) modeset(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 28.159] (--) modeset(0): HDMI max TMDS frequency 225000KHz [ 29.231] (II) config/udev: Adding input device Logitech Wireless Mouse (/dev/input/mouse0) [ 29.243] (II) No input driver specified, ignoring this device. [ 29.243] (II) This device may have been added with another device file. [ 29.395] (II) config/udev: Adding input device Logitech Wireless Mouse (/dev/input/event2) [ 29.395] (**) Logitech Wireless Mouse: Applying InputClass "libinput pointer catchall" [ 29.395] (II) Using input driver 'libinput' for 'Logitech Wireless Mouse' [ 29.395] (**) Logitech Wireless Mouse: always reports core events [ 29.395] (**) Option "Device" "/dev/input/event2" [ 29.395] (**) Option "_source" "server/udev" [ 29.405] (II) event2 - Logitech Wireless Mouse: is tagged by udev as: Mouse [ 29.405] (II) event2 - Logitech Wireless Mouse: device is a pointer [ 29.406] (II) event2 - Logitech Wireless Mouse: device removed [ 29.472] (**) Option "config_info" "udev:/sys/devices/platform/usb@fe800000/fe800000.usb/xhci-hcd.0.auto/usb5/5-1/5-1:1.1/0003:046D:C534.0002/0003:046D:4058.0004/input/input19/event2" [ 29.473] (II) XINPUT: Adding extended input device "Logitech Wireless Mouse" (type: MOUSE, id 8) [ 29.474] (**) Option "AccelerationScheme" "none" [ 29.477] (**) Logitech Wireless Mouse: (accel) selected scheme none/0 [ 29.477] (**) Logitech Wireless Mouse: (accel) acceleration factor: 2.000 [ 29.477] (**) Logitech Wireless Mouse: (accel) acceleration threshold: 4 [ 29.486] (II) event2 - Logitech Wireless Mouse: is tagged by udev as: Mouse [ 29.486] (II) event2 - Logitech Wireless Mouse: device is a pointer [ 29.507] (II) config/udev: Adding input device Logitech Wireless Keyboard PID:4023 (/dev/input/event1) [ 29.507] (**) Logitech Wireless Keyboard PID:4023: Applying InputClass "libinput keyboard catchall" [ 29.507] (II) Using input driver 'libinput' for 'Logitech Wireless Keyboard PID:4023' [ 29.507] (**) Logitech Wireless Keyboard PID:4023: always reports core events [ 29.507] (**) Option "Device" "/dev/input/event1" [ 29.507] (**) Option "_source" "server/udev" [ 29.533] (II) event1 - Logitech Wireless Keyboard PID:4023: is tagged by udev as: Keyboard [ 29.534] (II) event1 - Logitech Wireless Keyboard PID:4023: device is a keyboard [ 29.535] (II) event1 - Logitech Wireless Keyboard PID:4023: device removed [ 29.572] (II) libinput: Logitech Wireless Keyboard PID:4023: needs a virtual subdevice [ 29.572] (**) Option "config_info" "udev:/sys/devices/platform/usb@fe800000/fe800000.usb/xhci-hcd.0.auto/usb5/5-1/5-1:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input18/event1" [ 29.572] (II) XINPUT: Adding extended input device "Logitech Wireless Keyboard PID:4023" (type: MOUSE, id 9) [ 29.574] (**) Option "AccelerationScheme" "none" [ 29.575] (**) Logitech Wireless Keyboard PID:4023: (accel) selected scheme none/0 [ 29.575] (**) Logitech Wireless Keyboard PID:4023: (accel) acceleration factor: 2.000 [ 29.575] (**) Logitech Wireless Keyboard PID:4023: (accel) acceleration threshold: 4 [ 29.588] (II) event1 - Logitech Wireless Keyboard PID:4023: is tagged by udev as: Keyboard [ 29.588] (II) event1 - Logitech Wireless Keyboard PID:4023: device is a keyboard [ 29.597] (**) Logitech Wireless Keyboard PID:4023: Applying InputClass "libinput keyboard catchall" [ 29.597] (II) Using input driver 'libinput' for 'Logitech Wireless Keyboard PID:4023' [ 29.597] (**) Logitech Wireless Keyboard PID:4023: always reports core events [ 29.597] (**) Option "Device" "/dev/input/event1" [ 29.597] (**) Option "_source" "_driver/libinput" [ 29.597] (II) libinput: Logitech Wireless Keyboard PID:4023: is a virtual subdevice [ 29.597] (**) Option "config_info" "udev:/sys/devices/platform/usb@fe800000/fe800000.usb/xhci-hcd.0.auto/usb5/5-1/5-1:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input18/event1" [ 29.597] (II) XINPUT: Adding extended input device "Logitech Wireless Keyboard PID:4023" (type: KEYBOARD, id 10) [ 29.597] (**) Option "xkb_model" "pc105" [ 29.597] (**) Option "xkb_layout" "latam" [ 29.598] (WW) Option "xkb_variant" requires a string value [ 29.598] (**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"

Thank you very much, mounting the image and changing armbianEnv.txt to console=serial #disp_mode=1920x1080p60 had it go further: Starting kernel ... Loading, please wait... Starting version 241 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. done. Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! UUID=b9866ace-f260-437c-9794-8e1a363a3c71 does not exist. Dropping to a shell! (initramfs) Now it is unable to find the root filesystem (but when I check the UUID on my PC it does match

Hi thanks for writing up this howto, unfortunately I can't get it to work. I have a RockPi 4c, Crucial P1 M.2 1TB NVME. I also tried squishykid's workaround. It seems that my nvme is not recognized. After the "Starting kernel ... " message the boot process stops in a busybox shell. The error message says that UUID=xxxx does not exist. Too bad. So, there's an NVME you can add to your Doesn't Work list. Cheers Laci

Yesterday 1 of my 3 NanoPi Neo2 didnt boot complete anymore. Because I had i the last time - I thought that the internal 2.5" HDD has died and couldnt mounted anymore from /etc/fstab Today I checked the 2.5" HDD externally and its fine So I connected a TTL-RS232 for the boot-output and did get: Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. done. Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! UUID=47f29e2a-b4bd-451d-88 does not exist. Dropping to a shell! (initramfs) The NanoPi Neo2 isnt finding the UUID for the root-filesystem = my sdcard? I did pu the card in a reader on my other NanoPi Neo2 and used blkid to check the UUID - and did get: /dev/sdb1: UUID="47f29e2a-b4bd-451d-88a9-35998f669cd1" TYPE="ext4" PARTUUID="53e18e13-01" in /etc/fstab there is UUID=47f29e2a-b4bd-451d-88 and here at the "remote" system UUID=47f29e2a-b4bd-451d-88a9-35998f669cd1 Why and when has this UUID extended/expanded (and why isnt it booting with the short version?)? So I did put the new/longer UUID for root in the /etc/fstab on the sdcard and put it back in the half-booting NanoPi Neo2. armbianmonitor -u System diagnosis information has been uploaded to http://ix.io/2KOz Now this Neo2 is booting fine. Should I check my other 2 Neo2 and compare blkid to the /etc/fstab ? On my second (512MB) Neo2 I got the same long UUID for root: UUID=47f29e2a-b4bd-451d-88a9-35998f669cd1 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1 /dev/mmcblk0p1: UUID="47f29e2a-b4bd-451d-88a9-35998f669cd1" TYPE="ext4" PARTUUID="53e18e13-01" but on my third (1GB LTS) Neo2 the UUIDs didnt match and it DOES boot and mount root: UUID=47f29e2a-b4bd-451d-88a9-35998f669cd1 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1 /dev/mmcblk0p1: UUID="4e972167-ea53-4c61-9d49-a67b1f839f5f" TYPE="ext4" PARTUUID="d2f285f3-01" [EDIT] edited /etc/fstab to 4e972167-ea53-4c61-9d49-a67b1f839f5f as seen in blkid and it boots also perfect (maybe a differnt u-boot in "flash"?) System diagnosis information has been uploaded to http://ix.io/2KON Is it normal that all 3 Neo2 got 47f29e2a-b4bd-451d-88a9-35998f669cd1 as root-UUID? (UUID of the flash image - should this change after resize?) The 1GB Neo2 does use a Focal-dev-image and the other use a Buster-dev-image.

I have put together an answer that worked for me. No, I don't want to fund Armbian developers to write SATISFACTORY backup program/s. Firstly, very capable multi-purpose backup program suites already exist for Linux and secondly, this particular backup problem is too deep in the bits and bytes - especially given the clues you have given me. To produce the micro SD card I have described there are a number of simple steps, all executed from the command line interface. The following is quite wordy and tries to be appropriate for users who are not familiar with Linux command line and its suite of utilities. 1. Find or produce an at-least-minimally-set-up appropriate Armbian system on a micro SD card, preferably the same version of Armbian that you are running on your EMMC memory. We are going to extract the bootloader off this SD card and it needs to be appropriate to the Armbian on the EMMC. Alternatively, you may be able to download a binary image, if so, skip steps 3 and 4. 2. Log in as root (for preference) on a command-line terminal to your EMMC-centred PC+ by some means. If you do not log in as root, you will have to preface most (all) of the typed commands given below with 'sudo' and re-enter your password several times. 3. Insert this SD card into the OrangePi PC Plus that you wish to clone the Armbian from. Wait a few seconds for Armbian to recognise it then type 'ls /dev/mmcblk*' Armbian should respond with something like: /dev/mmcblk0 /dev/mmcblk1 /dev/mmcblkboot1 /dev/mmcblk0p1 /dev/mmvblk1boot0 /dev/mmcblk1p1 mmcblk0 is the SD card and mmcblk1 is the EMMC memory. 4. Plug a USB stick into one of the USB2 ports on the board. Armbian will recognise this as /dev/sda with a file system in /dev/sda1 and mount it at /media/<USERNAME> where <USERNAME> is some username that you were logged in as the last time you plugged in a USB stick. 5. Type the command 'dd count=8192 if=/dev/mmcblk0 of=/media/<USERNAME>/bootloader.img (do not add any spaces around the equals signs) and the bootloader binary image will be copied off the SD card onto the USB stick in less than a minute. 6. Having a copy of the required bootloader on the USB stick, if you do not wish to over-write the contents of the SD card, replace it with one at least as large as the EMMC memory. Type the command 'fdisk /dev/mmcblk1' then press 'p' and 'Enter' then 'q' and 'Enter'. Be very careful to not do anything else here because this program CAN destroy your EMMC system if mishandled. Armbian on my PC+ displayed: Device Boot Start End Sectors Size Id Type /dev/mmcblk1p1 8192 15117183 15108992 7.2G 83 Linux 7. Using 'End' sector number, now over-write the SD card with command: 'dd count=15117183 if=/dev/mmcblk1 of=/dev/mmcblk0' Note that we are copying the file system plus the first 8192 sectors which contains the bootloader and the master boot record (MBR). We are going to write the bootloader we saved earlier into that low space and need to leave room. 8. Copy the bootloader obtained earlier into that space of 8192 sectors at the start of the SD card: type 'dd count=8192 if=/media/<USERNAME>/bootloader.img' In the process we will over-write the first sector on the SD card which contains MBR and the partition table with the MBR from from the earlier SD card which will contain data almost certainly irrelevant to the file structure we originally copied from the EMMC. 9. The next step is to again copy data from the EMMC to the new SD card, limiting the copy to just the first sector, restoring the MBR and partition table data to correctly duplicate that structure to be relevant to the partition we earlier copied from the EMMC. type 'dd count=1 if=/dev/mmcblk1 of=/dev/mmcblk0' 10. The final step is to mount the newly prepared SD card and edit the UUID in its Boot folder. type 'mount /dev/mmcblk0p1 /mnt' This attaches the SD partion to the /mnt folder. type 'cd /mnt/boot' make our area of work the default. type 'blkid | grep mmcblk0p1 >newUUID.txt' This saves the UUID we must use into the file /mnt/boot/armbianEnv.txt 'cat newUUID.txt' will show the saved UUID and more eg: /dev/mmcblk0p1: UUID="48a407c4-ca6e-4a21-ac94-71a9eac17295" TYPE="ext4" PARTUUID="709ff8b6-01" You must now edit the file ./armbianEnv.txt with an editor such as 'nano' (I prefer joe) and replace the UUID in the line such as the following with the one obtained by the above method. rootdev=UUID=828b3b50-226d-4f90-b607-2bccb4031c24 All done. I suggest that the next operation should be to save an image of the SD card just created onto the USB stick, eg: dd count=15117183 if=/dev/mmcblk0 of=/media/<USERNAME>/ArmbianSystem.img unmount the USB stick eg: umount /dev/sda1 and the new SD card eg: umount /dev/mmcblk0p1 then make a backup copy of that image by your usual file backup procedures. If you have another Orange Pi PCplus, you should plug the new SD card in and test it before packing up and opening a well-earned beer. Peter. PS. The above assumes an 8192-sector-sized bootloader at the start of the EMMC and SD cards. I have seen some SD cards formatted by Windows for which this is not the case. You should check for this using fdisk before proceeding.

Unfortunately later kernels (just tried rk322x 5.8.14 debs from apt.armbian, but also 5.x images) drop to initramfs, which I do not how to resolve; Loading, please wait.... Starting version 241 -etc- Begin: Running /scripts/local-block ... done -repeated ~20 times- done. Gave up waiting for root files system device. Common problems: -Boot args -check rootdelay -missing modules ALERT! UUID=.... does not exist Dropping to a shell! (initramfs) The UUID mentioned is correct.

/boot is big enough, because armbian is only using 1 partition (on my install) and Iam using a 8GB MicroSDCard After using a TTL-serial-dongle I did found that kernel 5.9.0rc2 had give me the 2 following problems: 1.) is seems to be searching for a UUID/BKLID which is too short: Its searching for f17c5ebe-dc6c-4c52-831e-f2265 but the full name is f17c5ebe-dc6c-4c52-831e-f226539501a5 which was correct in /boot/armbianEnv.txt and /etc/fstab Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! UUID=f17c5ebe-dc6c-4c52-831e-f2265 does not exist. Dropping to a shell! Rebooting automatically due to panic= boot argument [ 43.246465] reboot: Restarting system I mounted the MicroSDCard on my other Neo2 and did a fschk /dev/sdb1 (for the card). After that the Neo2 did boot from this card, but couldnt find the NAS-HDD which is connected via USB (USB3-SATA on USB2.0 port) 2.) the kernel 5.9.0rc2 couldnt load the dtb-overlays (also while now booting from the card and root 7 is there, but the overlays doenst seem to be compatibe): Applying kernel provided DT overlay sun50i-h5-cpu-clock-1.0GHz-1.1v.dtbo failed on fdt_overlay_apply(): FDT_ERR_NOTFOUND 504 bytes read in 6 ms (82 KiB/s) Applying kernel provided DT overlay sun50i-h5-usbhost1.dtbo failed on fdt_overlay_apply(): FDT_ERR_BADMAGIC base fdt does did not have a /__symbols__ node make sure you've compiled with -@ 504 bytes read in 5 ms (97.7 KiB/s) Applying kernel provided DT overlay sun50i-h5-usbhost2.dtbo failed on fdt_overlay_apply(): FDT_ERR_BADMAGIC base fdt does did not have a /__symbols__ node make sure you've compiled with -@ Error applying DT overlays, restoring original DT Because booting the 5.9.0rc2 did work - I reinstalled the kernel 5.8.3 (Image, u-boot, dtb, firmware and config) via dpkg. After reboot the complete system is working like before without reinstalling I only deleted some kernel 5.4.x-dtb directorys from /boot Here some more TTL-Boot-log for your information: Dont know why kernel 5.9.0rc2 was booting in the TTL-Log with U-Boot 2019.04-armbian (Nov 18 2019 - 21:52:14 +0100) Is there more to do as installing the new u-boot.deb? Wasnt there a option to update u-boot via armbian-config? e.g. Install to/update boot loader ==> (2) Install/Update Bootloader on SD/eMMC I think (1) Boot from SD - system on SATA, USB or NVMe isnt the right for me

Renegade Elite fails to boot with mezzanine and dtb > 5.5.11 I finally got my serial dongle working and got some output while booting. U-Boot TPL 2019.10-armbian (Dec 11 2019 - 19:53:44) Trying to boot from BOOTROM Returning to boot ROM... U-Boot SPL 2019.10-armbian (Dec 11 2019 - 19:53:44 +0000) Trying to boot from MMC1 NOTICE: BL31: v2.2(release):a04808c-dirty NOTICE: BL31: Built : 19:53:30, Dec 11 2019 U-Boot 2019.10-armbian (Dec 11 2019 - 19:53:44 +0000) Model: Firefly ROC-RK3399-PC Board DRAM: 3.9 GiB MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0 Loading Environment from EXT4... Card did not respond to voltage select! In: serial@ff1a0000 Out: serial@ff1a0000 Err: serial@ff1a0000 Model: Firefly ROC-RK3399-PC Board rockchip_dnl_key_pressed: adc_channel_single_shot fail! Net: eth0: ethernet@fe300000 Hit any key to stop autoboot: 0 Card did not respond to voltage select! switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found U-Boot script /boot/boot.scr 2949 bytes read in 5 ms (575.2 KiB/s) ## Executing script at 00500000 Boot script loaded from mmc 1 211 bytes read in 4 ms (50.8 KiB/s) 10529111 bytes read in 450 ms (22.3 MiB/s) 20505088 bytes read in 871 ms (22.5 MiB/s) 76102 bytes read in 12 ms (6 MiB/s) 2698 bytes read in 9 ms (292 KiB/s) Applying kernel provided DT fixup script (rockchip-fixup.scr) ## Executing script at 39000000 ## Loading init Ramdisk from Legacy Image at 04000000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 10529047 Bytes = 10 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Loading Ramdisk to f5514000, end f5f1e917 ... OK Loading Device Tree to 00000000f5499000, end 00000000f5513fff ... OK Starting kernel ... Loading, please wait... Starting version 245.4-4ubuntu3.1 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done. done. Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! UUID=b68dafc4-9fb4-477a-bc71-d03817baf081 does not exist. Dropping to a shell! Rebooting automatically due to panic= boot argument [ 49.287360] reboot: Restarting system UUID=b68dafc4-9fb4-477a-bc71-d03817baf081 is the ext4 / partition on the microSD card

Hello, is this issue fixed now ? I'm using OrangePi One Plus server, and three days ago I did apt -y upgrade. After that, it wont boot -- drops to initramfs ( UUID does not exist ). I did a peek here, and tried to qemu chroot to sdcard from a Focal running VM, and issued " update-initramfs -u ", but that did not solve my problem -- still wont boot. 12 hours ago I restored to a month old backup, and it booted fine ofc, but then I tried to upgrade again, as there is no more warning about broken Focal images, but sure enough, dropped to initramfs Is there something else I can try ?

Hi everybody, I have encountered an unusual problem with starting Cubietruck (cubieboard3) with Armbian installed on microSD Card 8GB and the RAID subboard (two SSD 120GB), see below: Loading, please wait... Starting version 241 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. done. Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules); ls /dev ALERT! UUID=caf39fe8-f63f-4a71-b9be-e15597b4f987 does not exist. Dropping to a shell! (initramfs) I had installed the Armbian system using the script "nand-sata-install" and configured some server applications such as Apache, ISPConfig, Mariadb etc . , and Docker ... and it seemed to work out well. However, sometimes the system have had failures during starting with the boot message as described above. I could turn off the machine and restarted it (hard reboot), but now it is still blocked. I checked the microSD Card file system (ext4) with GParted. Unfortunately it did not work. Nothing has changed. See below my previous topic about the Cubieboard3 and the RAID subboard documents. Thanks in advance for your enlightning reply.

When changing ROOTFS, you need to change BOTH places in /boot/armbianEnv.txt as well as /etc/fstab, otherwise you get this "ALERT! UUID=... doesn't exist" ...

Dear all, My problem: I've tried to Copy my current micro sd card(8go) to another one (32go) Copy with a virtualbox (Ubuntu with the dd command to Copy the first card to the other one) , or with gparted (Copy and past) But with all these methods the problem stay the same = no boot Error message: Gave up waiting for root file system device. Common problems - Boot args (cat proc/cnd.no) - Check rootdelay (did the system wait long enough?) - Missing modules (cat proc/modules: Is /dev) ALERT UUID-16bb1d19-3ee3-119r-Be32-9920fr7d190a does not exist. Dropping to a shell! (initramfs) I'm not an expert with Linux so I don't know how can I resolve this problem. Can you help me ? Thx in advance

I've just bought two Tinkerboards S for my thesis project, and I need to install Armbian on it. I've accustomed myself with the maskrom mode and I've successfully booted the Debian TinkerOS from both the SD and the eMMC. Similarly I successfully booted Armbian from the SD but once I flash the same image on the eMMC it fails to boot, I get this output: Scanning for Btrfs filesystems Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait for the right device?) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) ALERT! UUID=a5ccaf22-ffde-44c2-8c59-84a851f9fd90 does not exist. Dropping to shell! I've checked and /boot/armbianEnv.txt and /etc/fstab match the uuid obtained with blkid corresponding to /dev/mmcblk1p1 (the root partition on the eMMC) I've been flashing images like this for both the SD card (plugging it in the PC) and the eMMC using the microUSB cable connected to the tinkerboard: dd if=armbian_image.img of=/dev/sdX bs=4M status=progress oflag=sync I've tested these different images with same results, also building one did not change the results. Armbian_19.11.3_Tinkerboard_bionic_current_5.3.11/ Armbian_19.11.3_Tinkerboard_bionic_legacy_4.4.199_desktop/ Armbian_19.11.3_Tinkerboard_buster_current_5.3.11_minimal/ I can't find a good guide for this, I suspect it could be related to UBoot. Seems like it can't read the root partition somehow, do you guys have any idea?

I did as you told: install Armbian on a new SD, bootup, create user and set passwords. After I adjust /boot/armbianEnv.txt to set UUID to my drive and then rebooted successfully. One point, because older SD was going into RO mode, I have badly installed package: initramfs-tools, and future apt upgrade were finished with an error. So I have to reinstall it by command: sudo apt install --reinstall initramfs-tools:armhf After this everything works good, thanks! UPDATE: I was a bit wrong, Kernel has some problems, this is an error when I try to run iptables: $ sudo iptables -vnL modprobe: ERROR: ../libkmod/libkmod.c:586 kmod_search_moddep() could not open moddep file '/lib/modules/4.19.57-sunxi/modules.dep.bin' modprobe: FATAL: Module ip_tables not found in directory /lib/modules/4.19.57-sunxi iptables v1.6.1: can't initialize iptables table `filter': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. I try this and that with update and upgrade, but helps only to re-install the same kernel via armbain-config>System>Other>choose the same Kernel as I have had before.

Any hint how to try it out? I compiled the the dev branch kernel which gave me linux-5.2.y and installed the kernel .debs on a 5.90 tinkerboard armbian image, but it won't boot. ## Loading init Ramdisk from Legacy Image at 21000000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 6444072 Bytes = 6.1 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Loading Ramdisk to 0f9da000, end 0ffff428 ... OK Loading Device Tree to 0f9cc000, end 0f9d9157 ... OK Starting kernel ... Loading, please wait... Starting version 241 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. .... Begin: Running /scripts/local-block ... done. done. Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! UUID=a26ac16a-d702-4a37-b486-8fb5073e7627 does not exist. Dropping to a shell! Rebooting automatically due to panic= boot argument [ 47.768428] reboot: Restarting system Should I have also installed the uboot-dev deb (I chickened out on that one) which was built alongside the dev kernel or what else am I missing?

Nice work Balbes, hello everybody Yesterday I tried to update my ALFAWISE S92 - CPU S912 2Gb RAM 16Gb eMMC WiFi Bluetooth IR CPU - AMLOGIC 912 Octa Core Ethernet chip - RTL8211F Gigabit Ethernet RADIO chip - Aigale AW-CM273SM => AP6355 as of Feb 2019 NO Linux SUPPORT eMMC chip - FERESEE NCEMBSF9-16G IR chip - 56526 TI 65A Board version - QII_V2.0_20160905 to the lastest build Armbian_5.76_Aml-s912_Debian_stretch_default_5.0.0-rc7-gb5aa11ceb-dirty_20190226 but I ran into some problems. Everiting is fine while booting from sdcard but when using armbian-config to write to emmc the system gets stuck in Begin: Waiting for /scripts/local-bloc ... done ALERT! LABEL=ROOTFS does not exist. Dropping to a shell! Tried to follow your post above but: Couldn't find any docs on how to activate the multi-boot using the new image. Script “/boot/create-mbr-linux.sh” can't be found on system. Also executed script “/root/install.sh” ... same behavior. Files from /boot from sdcard /armbianEnv.txt verbosity=1 rootdev=UUID=e4f3cef1-6360-464a-a70d-21cfd96b763c rootfstype=BOOT_IMAGE=/boot/vmlinuz-4.15.0-36-generic rootdev=LABEL=ROOTFS rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u /uEnv.ini dtb_name=/dtb/meson-gxm-khadas-vim2.dtb bootargs=root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 /extlinux/extlinux.conf LABEL Armbian LINUX /zImage INITRD /uInitrd FDTDIR /dtb # FDT /dtb/meson-gxm-khadas-vim2.dtb APPEND root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 fdisk -l Disk /dev/mmcblk0: 14.9 GiB, 15931539456 bytes, 31116288 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0xc4e7c27a Device Boot Start End Sectors Size Id Type /dev/mmcblk0p1 8192 270335 262144 128M e W95 FAT16 (LBA) /dev/mmcblk0p2 270336 30805119 30534784 14.6G 83 Linux Disk /dev/mmcblk1: 14.5 GiB, 15518924800 bytes, 30310400 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x2975c27a Device Boot Start End Sectors Size Id Type /dev/mmcblk1p1 1368064 1617919 249856 122M c W95 FAT32 (LBA) /dev/mmcblk1p2 1619968 30310399 28690432 13.7G 83 Linux Kindly please update the documentation for installing to emmc or guide me to get it to boot from emmc. Thank you. WORKAROUND Change partition LABEL sudo e2label /dev/mmcblk1p2 ROOTFS Maybe this should be run from install script to avoid such problems. INSTALL TO eMMC as of Feb 2019 While booting from SDCARD run /root/install.sh check with blkid so that has the wright label /dev/mmcblk1p2: LABEL="ROOTFS" otherwise correct it with sudo e2label /dev/mmcblk1p2 ROOTFS

/dev/mmcblk0p1: UUID="52362a95-0375-421e-aa81-047eacb65728" TYPE="ext4" PARTUUID="bc752536-01" /dev/zram0: LABEL="log2ram" UUID="4a3f553f-bbf8-4b67-a9a5-422883bbac80" TYPE="ext4" /dev/mmcblk0: PTUUID="bc752536" PTTYPE="dos" /dev/zram1: UUID="496dd411-8421-47bb-b94c-0d9b07e110df" TYPE="swap" /dev/zram2: UUID="a9f85b29-2bc2-44d8-bccc-2bffa73b0660" TYPE="swap" /dev/sda1: UUID="6bfb12b9-ccbf-44b4-bd02-fb9b1a845835" TYPE="ext4" PARTUUID="5bffa961-01" blkid normal image in sdcard I will check the other one in a moment. If change to /dev/sda1 error still exist.

fstab in sdcard: UUID=52362a95-0375-421e-aa81-047eacb65728 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1 fstab in pendrive: tmpfs /tmp tmpfs defaults,nosuid 0 0 UUID=52362a95-0375-421e-aa81-047eacb65728 /media/mmcboot ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro,x-gvfs-hide 0 1 /media/mmcboot/boot /boot none bind 0 0 UUID=6bfb12b9-ccbf-44b4-bd02-fb9b1a845835 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro,x-gvfs-hide 0 1 Change serial=both to serial=console U-Boot SPL 2018.11-armbian (Feb 08 2019 - 08:51:22 +0100) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2018.11-armbian (Feb 08 2019 - 08:51:22 +0100) Allwinner Technology CPU: Allwinner A20 (SUN7I) Model: LeMaker Banana Pi I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 Loading Environment from EXT4... ** File not found /boot/boot.env ** ** Unable to read "/boot/boot.env" from mmc0:1 ** Setting up a 720x576i composite-pal console (overscan 32x20) In: serial Out: vga Err: vga SCSI: SATA link 0 timeout. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst Net: eth0: ethernet@1c50000 230454 bytes read in 22 ms (10 MiB/s) starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3798 bytes read in 13 ms (285.2 KiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 204 bytes read in 10 ms (19.5 KiB/s) 8129025 bytes read in 468 ms (16.6 MiB/s) 7323200 bytes read in 424 ms (16.5 MiB/s) Found mainline kernel configuration 40331 bytes read in 61 ms (645.5 KiB/s) 5845 bytes read in 89 ms (63.5 KiB/s) Applying kernel provided DT fixup script (sun7i-a20-fixup.scr) ## Executing script at 44000000 ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 8128961 Bytes = 7.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 EHCI failed to shut down host controller. EHCI failed to shut down host controller. Loading Ramdisk to 4983f000, end 49fff9c1 ... OK reserving fdt memory region: addr=43000000 size=70000 Loading Device Tree to 497cc000, end 4983efff ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Loading, please wait... starting version 237 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done. done. Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! UUID=6bfb12b9-ccbf-44b4-bd02-fb9b1a845835 does not exist. Dropping to a shell! Rebooting automatically due to panic= boot argument

root@nanopct4:~# blkid /dev/nvme0n1p1: UUID="6984f986-8788-4dc7-9e57-e5a27d39a7d6" TYPE="ext4" PARTLABEL="Linux filesystem" PARTUUID="85cf3890-e009-4640-b803-b868558967b1" /dev/mmcblk1p1: UUID="53822d9c-1cb2-4a65-96e1-c20e030c4615" TYPE="ext4" PARTUUID="492db6dc-01" /dev/nvme0n1: PTUUID="ccc5a30e-c5ff-463d-9514-dceb88c77f01" PTTYPE="gpt" /dev/mmcblk1: PTUUID="492db6dc" PTTYPE="dos" /dev/zram0: LABEL="log2ram" UUID="c13859e3-cb78-489a-89d0-e147116b6f8c" TYPE="ext4" /dev/zram1: UUID="8346ad54-ee77-44ed-a14d-52cea05b4f10" TYPE="swap" /dev/zram2: UUID="b96d2711-611b-4bb5-83b0-f43f6b235e72" TYPE="swap" /dev/zram3: UUID="953d115a-07d3-4b62-83eb-f0d05bac59c8" TYPE="swap" /dev/zram4: UUID="46fce07f-d5df-41d1-b833-2c673213d05b" TYPE="swap" root@nanopct4:~# grep 6984f986-8788-4dc7-9e57-e5a27d39a7d6 /etc/fstab UUID=6984f986-8788-4dc7-9e57-e5a27d39a7d6 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro,x-gvfs-hide root@nanopct4:~# grep 6984f986-8788-4dc7-9e57-e5a27d39a7d6 /boot/armbianEnv.txt rootdev=UUID=6984f986-8788-4dc7-9e57-e5a27d39a7d6 It does exist when booting the stable kernel. After upgrading to linux-image-dev-rk3399 it doesn't find the device and halts with the alert. I tried it twice with the same result and had to switch back to stable kernel each time.

It was. I made a copy of the files and checked. The error message was: ALERT! UUID=69... does not exist. Dropping to a shell! Rebooting automatically due to panic= boot argument

I'm getting this too, not just on the nightly build, also on the supported "light desktop usage scenario" Armbian Stretch and Armbian Xenial mainline images here. Only Armbian Xenial desktop legacy kernel 3.4.y has a working desktop for me when connected to HDMI. Headless, as well as just a text-only terminal on the monitor, everything works like a charm. /var/log/Xorg.0.log suggets it at least does detect the monitor, but for some raison bails out with AddScreen/ScreenInit failed for driver 0 [ 467.283] X.Org X Server 1.19.6 Release Date: 2017-12-20 [ 467.316] X Protocol Version 11, Revision 0 [ 467.327] Build Operating System: Linux 4.4.0-119-generic armv7l Ubuntu [ 467.338] Current Operating System: Linux orangepiplus2e 4.14.50-sunxi #6 SMP Mon Jun 18 14:09:47 UTC 2018 armv7l [ 467.338] Kernel command line: root=UUID=907d1c62-bd37-4d65-9619-b9e8abe22a16 rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=3526c152-01 ubootsource=mmc usb-storage.quirks= sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1 [ 467.363] Build Date: 13 April 2018 08:09:42PM [ 467.375] xorg-server 2:1.19.6-1ubuntu4 (For technical support please see http://www.ubuntu.com/support) [ 467.388] Current version of pixman: 0.34.0 [ 467.413] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 467.414] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 467.465] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 18 14:35:15 2018 [ 467.479] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 467.492] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 467.493] (==) No Layout section. Using the first Screen section. [ 467.493] (==) No screen section available. Using defaults. [ 467.493] (**) |-->Screen "Default Screen Section" (0) [ 467.493] (**) | |-->Monitor "<default monitor>" [ 467.494] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 467.494] (**) Option "BlankTime" "0" [ 467.494] (**) Option "StandbyTime" "0" [ 467.494] (**) Option "SuspendTime" "0" [ 467.494] (**) Option "OffTime" "0" [ 467.494] (==) Automatically adding devices [ 467.494] (==) Automatically enabling devices [ 467.494] (==) Automatically adding GPU devices [ 467.494] (==) Automatically binding GPU devices [ 467.494] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 467.495] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 467.495] Entry deleted from font path. [ 467.495] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 467.495] Entry deleted from font path. [ 467.495] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 467.495] Entry deleted from font path. [ 467.495] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist. [ 467.495] Entry deleted from font path. [ 467.495] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 467.495] Entry deleted from font path. [ 467.495] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 467.495] Entry deleted from font path. [ 467.495] (==) FontPath set to: /usr/share/fonts/X11/misc, built-ins [ 467.495] (==) ModulePath set to "/usr/lib/xorg/modules" [ 467.495] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 467.495] (II) Loader magic: 0x64c008 [ 467.495] (II) Module ABI versions: [ 467.495] X.Org ANSI C Emulation: 0.4 [ 467.495] X.Org Video Driver: 23.0 [ 467.495] X.Org XInput driver : 24.1 [ 467.495] X.Org Server Extension : 10.0 [ 467.497] (--) using VT number 3 [ 467.497] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 467.499] (II) xfree86: Adding drm device (/dev/dri/card0) [ 467.518] (II) no primary bus or device found [ 467.518] falling back to /sys/devices/platform/display-engine/drm/card0 [ 467.518] (II) LoadModule: "glx" [ 467.518] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 467.523] (II) Module glx: vendor="X.Org Foundation" [ 467.523] compiled for 1.19.6, module version = 1.0.0 [ 467.523] ABI class: X.Org Server Extension, version 10.0 [ 467.523] (==) Matched modesetting as autoconfigured driver 0 [ 467.523] (==) Matched fbdev as autoconfigured driver 1 [ 467.523] (==) Assigned the driver to the xf86ConfigLayout [ 467.523] (II) LoadModule: "modesetting" [ 467.523] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 467.524] (II) Module modesetting: vendor="X.Org Foundation" [ 467.524] compiled for 1.19.6, module version = 1.19.6 [ 467.524] Module class: X.Org Video Driver [ 467.524] ABI class: X.Org Video Driver, version 23.0 [ 467.524] (II) LoadModule: "fbdev" [ 467.524] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 467.525] (II) Module fbdev: vendor="X.Org Foundation" [ 467.525] compiled for 1.19.3, module version = 0.4.4 [ 467.525] Module class: X.Org Video Driver [ 467.525] ABI class: X.Org Video Driver, version 23.0 [ 467.525] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 467.525] (II) FBDEV: driver for framebuffer: fbdev [ 467.684] (II) modeset(0): using drv /dev/dri/card0 [ 467.684] (WW) Falling back to old probe method for fbdev [ 467.685] (II) Loading sub module "fbdevhw" [ 467.685] (II) LoadModule: "fbdevhw" [ 467.685] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 467.685] (II) Module fbdevhw: vendor="X.Org Foundation" [ 467.685] compiled for 1.19.6, module version = 0.0.2 [ 467.686] ABI class: X.Org Video Driver, version 23.0 [ 467.686] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 467.686] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 467.686] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 467.687] (==) modeset(0): RGB weight 888 [ 467.687] (==) modeset(0): Default visual is TrueColor [ 467.687] (II) Loading sub module "glamoregl" [ 467.687] (II) LoadModule: "glamoregl" [ 467.687] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 467.705] (II) Module glamoregl: vendor="X.Org Foundation" [ 467.705] compiled for 1.19.6, module version = 1.0.0 [ 467.705] ABI class: X.Org ANSI C Emulation, version 0.4 [ 467.705] (II) glamor: OpenGL accelerated X.org driver based. [ 467.833] (II) glamor: EGL version 1.4 (DRI2): [ 467.834] EGL_MESA_drm_image required. [ 467.836] (EE) modeset(0): glamor initialization failed [ 467.836] (II) modeset(0): ShadowFB: preferred NO, enabled NO [ 468.052] (II) modeset(0): Output HDMI-1 has no monitor section [ 468.266] (II) modeset(0): EDID for output HDMI-1 [ 468.266] (II) modeset(0): Manufacturer: SAM Model: b81 Serial#: 808663346 [ 468.266] (II) modeset(0): Year: 2014 Week: 32 [ 468.266] (II) modeset(0): EDID Version: 1.3 [ 468.266] (II) modeset(0): Digital Display Input [ 468.266] (II) modeset(0): Max Image Size [cm]: horiz.: 61 vert.: 35 [ 468.266] (II) modeset(0): Gamma: 2.20 [ 468.266] (II) modeset(0): DPMS capabilities: Off [ 468.266] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 468.266] (II) modeset(0): First detailed timing is preferred mode [ 468.266] (II) modeset(0): redX: 0.634 redY: 0.341 greenX: 0.312 greenY: 0.636 [ 468.266] (II) modeset(0): blueX: 0.158 blueY: 0.062 whiteX: 0.312 whiteY: 0.329 [ 468.266] (II) modeset(0): Supported established timings: [ 468.266] (II) modeset(0): 720x400@70Hz [ 468.266] (II) modeset(0): 640x480@60Hz [ 468.266] (II) modeset(0): 640x480@67Hz [ 468.266] (II) modeset(0): 640x480@72Hz [ 468.266] (II) modeset(0): 640x480@75Hz [ 468.266] (II) modeset(0): 800x600@56Hz [ 468.266] (II) modeset(0): 800x600@60Hz [ 468.266] (II) modeset(0): 800x600@72Hz [ 468.266] (II) modeset(0): 800x600@75Hz [ 468.266] (II) modeset(0): 832x624@75Hz [ 468.267] (II) modeset(0): 1024x768@60Hz [ 468.267] (II) modeset(0): 1024x768@70Hz [ 468.267] (II) modeset(0): 1024x768@75Hz [ 468.267] (II) modeset(0): 1280x1024@75Hz [ 468.267] (II) modeset(0): 1152x864@75Hz [ 468.267] (II) modeset(0): Manufacturer's mask: 0 [ 468.267] (II) modeset(0): Supported standard timings: [ 468.267] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 468.267] (II) modeset(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129 [ 468.267] (II) modeset(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281 [ 468.267] (II) modeset(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 468.267] (II) modeset(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 468.267] (II) modeset(0): #5: hsize: 1600 vsize 900 refresh: 60 vid: 49321 [ 468.267] (II) modeset(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 468.267] (II) modeset(0): Supported detailed timing: [ 468.267] (II) modeset(0): clock: 297.0 MHz Image Size: 608 x 345 mm [ 468.267] (II) modeset(0): h_active: 3840 h_sync: 4016 h_sync_end 4104 h_blank_end 4400 h_border: 0 [ 468.267] (II) modeset(0): v_active: 2160 v_sync: 2168 v_sync_end 2178 v_blanking: 2250 v_border: 0 [ 468.267] (II) modeset(0): Ranges: V min: 24 V max: 75 Hz, H min: 30 H max: 90 kHz, PixClock max 305 MHz [ 468.267] (II) modeset(0): Monitor name: U28D590 [ 468.267] (II) modeset(0): Serial No: H4MF800857 [ 468.267] (II) modeset(0): Supported detailed timing: [ 468.267] (II) modeset(0): clock: 148.5 MHz Image Size: 608 x 345 mm [ 468.267] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 468.267] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 468.267] (II) modeset(0): Supported detailed timing: [ 468.267] (II) modeset(0): clock: 148.5 MHz Image Size: 608 x 345 mm [ 468.268] (II) modeset(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0 [ 468.268] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 468.268] (II) modeset(0): Supported detailed timing: [ 468.268] (II) modeset(0): clock: 74.2 MHz Image Size: 608 x 345 mm [ 468.268] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0 [ 468.268] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0 [ 468.268] (II) modeset(0): Supported detailed timing: [ 468.268] (II) modeset(0): clock: 241.5 MHz Image Size: 608 x 345 mm [ 468.268] (II) modeset(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0 [ 468.268] (II) modeset(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0 [ 468.268] (II) modeset(0): Number of EDID sections to follow: 1 [ 468.268] (II) modeset(0): EDID (in hex): [ 468.268] (II) modeset(0): 00ffffffffffff004c2d810b32393330 [ 468.268] (II) modeset(0): 20180103803d23782a5fb1a2574fa228 [ 468.268] (II) modeset(0): 0f5054bfef80714f810081c081809500 [ 468.268] (II) modeset(0): a9c0b300010104740030f2705a80b058 [ 468.268] (II) modeset(0): 8a0060592100001e000000fd00184b1e [ 468.268] (II) modeset(0): 5a1e000a202020202020000000fc0055 [ 468.268] (II) modeset(0): 3238443539300a2020202020000000ff [ 468.268] (II) modeset(0): 0048344d463830303835370a20200132 [ 468.268] (II) modeset(0): 020323f14890041f1303122022230907 [ 468.268] (II) modeset(0): 07830100006d030c002000803c201060 [ 468.268] (II) modeset(0): 010203023a801871382d40582c450060 [ 468.268] (II) modeset(0): 592100001e023a80d072382d40102c45 [ 468.268] (II) modeset(0): 8060592100001e011d007251d01e206e [ 468.269] (II) modeset(0): 28550060592100001e565e00a0a0a029 [ 468.269] (II) modeset(0): 503020350060592100001a0000000000 [ 468.269] (II) modeset(0): 00000000000000000000000000000037 [ 468.269] (--) modeset(0): HDMI max TMDS frequency 300000KHz [ 468.269] (II) modeset(0): Printing probed modes for output HDMI-1 [ 468.269] (II) modeset(0): Modeline "3840x2160"x30.0 297.00 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync (67.5 kHz eP) [ 468.269] (II) modeset(0): Modeline "3840x2160"x25.0 297.00 3840 4896 4984 5280 2160 2168 2178 2250 +hsync +vsync (56.2 kHz e) [ 468.269] (II) modeset(0): Modeline "3840x2160"x24.0 297.00 3840 5116 5204 5500 2160 2168 2178 2250 +hsync +vsync (54.0 kHz e) [ 468.269] (II) modeset(0): Modeline "3840x2160"x30.0 296.70 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync (67.4 kHz e) [ 468.269] (II) modeset(0): Modeline "3840x2160"x24.0 296.70 3840 5116 5204 5500 2160 2168 2178 2250 +hsync +vsync (53.9 kHz e) [ 468.269] (II) modeset(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz e) [ 468.269] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 468.269] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 468.269] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e) [ 468.269] (II) modeset(0): Modeline "1920x1080"x30.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e) [ 468.269] (II) modeset(0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 468.269] (II) modeset(0): Modeline "1920x1080"x30.0 74.18 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.7 kHz e) [ 468.269] (II) modeset(0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 468.270] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e) [ 468.270] (II) modeset(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e) [ 468.270] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 468.270] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 468.270] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e) [ 468.270] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e) [ 468.270] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 468.270] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 468.270] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 468.270] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 468.270] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 468.270] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 468.270] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 468.270] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 468.270] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 468.270] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 468.270] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 468.270] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 468.270] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 468.270] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 468.270] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 468.271] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 468.271] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 468.271] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 468.271] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 468.271] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 468.271] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 468.271] (II) modeset(0): Output HDMI-1 connected [ 468.271] (II) modeset(0): Using exact sizes for initial modes [ 468.271] (II) modeset(0): Output HDMI-1 using initial mode 3840x2160 +0+0 [ 468.271] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 468.271] (==) modeset(0): DPI set to (96, 96) [ 468.271] (II) Loading sub module "fb" [ 468.271] (II) LoadModule: "fb" [ 468.271] (II) Loading /usr/lib/xorg/modules/libfb.so [ 468.272] (II) Module fb: vendor="X.Org Foundation" [ 468.272] compiled for 1.19.6, module version = 1.0.0 [ 468.272] ABI class: X.Org ANSI C Emulation, version 0.4 [ 468.272] (II) UnloadModule: "fbdev" [ 468.272] (II) Unloading fbdev [ 468.273] (II) UnloadSubModule: "fbdevhw" [ 468.273] (II) Unloading fbdevhw [ 468.273] (==) Depth 24 pixmap format is 32 bpp [ 468.273] (EE) Fatal server error: [ 468.273] (EE) AddScreen/ScreenInit failed for driver 0 [ 468.273] (EE) [ 468.274] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 468.274] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 468.274] (EE) [ 468.502] (EE) Server terminated with error (1). Closing log file.

Armbian_5.35_Orangepiplus2e_Ubuntu_xenial_default_3.4.113_desktop _________________________________________________________________ U-Boot SPL 2017.09-armbian (Nov 22 2017 - 16:50:56) DRAM: 2048 MiB Trying to boot from MMC1 U-Boot 2017.09-armbian (Nov 22 2017 - 16:50:56 +0100) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Plus 2E DRAM: 2 GiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: vidconsole Err: vidconsole Net: phy interface7 eth0: ethernet@1c30000 230454 bytes read in 203 ms (1.1 MiB/s) starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 USB4: USB EHCI 1.00 USB5: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found scanning bus 4 for devices... 2 USB Device(s) found scanning bus 1 for devices... 1 USB Device(s) found scanning bus 3 for devices... 2 USB Device(s) found scanning bus 5 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3708 bytes read in 209 ms (16.6 KiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 154 bytes read in 160 ms (0 Bytes/s) 5173329 bytes read in 528 ms (9.3 MiB/s) 4751880 bytes read in 526 ms (8.6 MiB/s) Found legacy kernel configuration 36808 bytes read in 560 ms (63.5 KiB/s) ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 5173265 Bytes = 4.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... [sun8i_fixup]: From boot, get meminfo: Start: 0x40000000 Size: 2048MB ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1 ion_reserve_select: ion chipid [0x2c00081! ion_reserve_common: ion reserve: [0xb0000000, 0xc0000000]! <6Loading, please wait... starting version 229 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. Begin: Will now check root file system ... fsck from util-linux 2.27.1 [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1 /dev/mmcblk0p1: recovering journal /dev/mmcblk0p1: clean, 113395/181792 files, 531197/727040 blocks done. done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. Welcome to Ubuntu 16.04.3 LTS! [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Created slice System Slice. [ OK ] Listening on fsck to fsckd communication Socket. [ OK ] Listening on Journal Audit Socket. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Created slice User and Session Slice. [ OK ] Reached target Swap. [ OK ] Listening on udev Kernel Socket. [ OK ] Started Trigger resolvconf update for networkd DNS. [ OK ] Reached target User and Group Name Lookups. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. [ OK ] Listening on udev Control Socket. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Reached target Slices. [ OK ] Listening on Syslog Socket. [ OK ] Reached target Encrypted Volumes. [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point. [ OK ] Listening on Journal Socket. Starting Load Kernel Modules... Mounting POSIX Message Queue File System... Starting Nameserver information manager... Starting Restore / save the current clock... Mounting Debug File System... Starting Create list of required st... nodes for the current kernel... Starting Remount Root and Kernel File Systems... Starting Set console keymap... [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. [ OK ] Mounted Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Load Kernel Modules. [ OK ] Started Restore / save the current clock. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Set console keymap. [ OK ] Started Nameserver information manager. Starting udev Coldplug all Devices... Starting Load/Save Random Seed... Starting Create Static Device Nodes in /dev... Mounting FUSE Control File System... Starting Apply Kernel Variables... [ OK ] Mounted FUSE Control File System. [ OK ] Started Load/Save Random Seed. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target Local File Systems (Pre). Mounting /tmp... Starting udev Kernel Device Manager... [ OK ] Mounted /tmp. [ OK ] Reached target Local File Systems. Starting Set console font and keymap... Starting Armbian enhanced Log2Ram... [ OK ] Started Entropy daemon using the HAVEGE algorithm. [ OK ] Started udev Kernel Device Manager. [ OK ] Reached target Sound Card. [ OK ] Found device /dev/ttyS0. [ OK ] Started Armbian enhanced Log2Ram. [ OK ] Found device /sys/subsystem/net/devices/eth0. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Starting Journal Service... Starting Load/Save RF Kill Switch Status... [ OK ] Started Journal Service. [ OK ] Started Load/Save RF Kill Switch Status. Starting Flush Journal to Persistent Storage... [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Reached target System Time Synchronized. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. Starting Armbian filesystem resize service... [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Started Daily Cleanup of Temporary Directories. [FAILED] Failed to start Set console font and keymap. See 'systemctl status console-setup.service' for details. [ OK ] Started Armbian filesystem resize service. [ OK ] Reached target Basic System. Starting System Logging Service... Starting Accounts Service... Starting Save/Restore Sound Card State... Starting Initializes zram swaping... Starting Avahi mDNS/DNS-SD Stack... Starting LSB: Load kernel modules needed to enable cpufreq scaling... Starting LSB: No Display Manager... Starting Login Service... Starting LSB: Armbian gathering hardware information... [ OK ] Reached target Network (Pre). Starting Raise network interfaces... [ OK ] Started ifup for eth0. [ OK ] Started Armbian first run tasks. [ OK ] Created slice system-getty.slice. Starting LSB: Start/stop sysstat's sadc... [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. [ OK ] Started Avahi mDNS/DNS-SD Stack. Starting Network Manager... Starting Permit User Sessions... [ OK ] Started System Logging Service. [ OK ] Started Initializes zram swaping. [ OK ] Started Permit User Sessions. [ OK ] Started Save/Restore Sound Card State. [ OK ] Started LSB: No Display Manager. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling. [ OK ] Started LSB: Start/stop sysstat's sadc. [ OK ] Started Network Manager. [ OK ] Started Login Service. Starting Network Manager Script Dispatcher Service... Starting Network Manager Wait Online... Starting Authenticate and Authorize Users to Run Privileged Tasks... Starting LSB: set CPUFreq kernel parameters... Starting Set console scheme... [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Started Set console scheme. [ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks. [ OK ] Started Raise network interfaces. [ OK ] Started Accounts Service. [ OK ] Started LSB: set CPUFreq kernel parameters. Starting LSB: Set sysfs variables from /etc/sysfs.conf... [ OK ] Reached target Network. Starting OpenBSD Secure Shell server... Starting OpenVPN service... [ OK ] Started Unattended Upgrades Shutdown. Starting Hostname Service... [ OK ] Started OpenVPN service. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started Hostname Service. [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf. [ OK ] Started LSB: Armbian gathering hardware information. Starting WPA supplicant... [ OK ] Started WPA supplicant. Starting Load/Save RF Kill Switch Status... [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Started Network Manager Wait Online. [ OK ] Reached target Network is Online. Starting /etc/rc.local Compatibility... Starting LSB: disk temperature monitoring daemon... [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. Starting LSB: Advanced IEEE 802.11 management daemon... Starting LSB: Start NTP daemon... [ OK ] Started /etc/rc.local Compatibility. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon. [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Started LSB: disk temperature monitoring daemon. [ OK ] Started LSB: Start NTP daemon. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. Ubuntu 16.04.3 LTS orangepiplus2e ttyS0 orangepiplus2e login: root Password: You are required to change your password immediately (root enforced) Changing password for root. (current) UNIX password: Enter new UNIX password: Retype new UNIX password: ___ ____ _ ____ _____ / _ \ _ __ __ _ _ __ __ _ ___ | _ \(_) _ |___ \| ____| | | | | '__/ _` | '_ \ / _` |/ _ \ | |_) | |_| |_ __) | _| | |_| | | | (_| | | | | (_| | __/ | __/| |_ _| / __/| |___ \___/|_| \__,_|_| |_|\__, |\___| |_| |_| |_| |_____|_____| |___/ Welcome to ARMBIAN 5.35 user-built Ubuntu 16.04.3 LTS 3.4.113-sun8i System load: 1.74 0.45 0.15 Up time: 0 min Memory usage: 2 % of 2014MB IP: CPU temp: 46°C Usage of /: 75% of 2.8G Warning: a reboot is needed to finish resizing the filesystem Please reboot the system as soon as possible New to Armbian? Check the documentation first: https://docs.armbian.com Thank you for choosing Armbian! Support: www.armbian.com Creating a new user account. Press <Ctrl-C> to abort Desktop environment will not be enabled if you abort the new user creation Please provide a username (eg. your forename): cocco Trying to add user cocco Adding user `cocco' ... Adding new group `cocco' (1000) ... Adding new user `cocco' (1000) with group `cocco' ... Creating home directory `/home/cocco' ... Copying files from `/etc/skel' ... Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully Changing the user information for cocco Enter the new value, or press ENTER for the default Full Name []: Room Number []: Work Phone []: Home Phone []: Other []: Is the information correct? [Y/n] y Dear cocco, your account cocco has been created and is sudo enabled. Please use this account for your daily work from now on. Your display settings are currently 720p (1280x720). To change this use the h3disp utility. Do you want to change display settings now? [nY] n Warning: a reboot is needed to finish resizing the filesystem Please reboot the system now root@orangepiplus2e:~# root@orangepiplus2e:~# startx xauth: file /root/.Xauthority does not exist X.Org X Server 1.18.4 Release Date: 2016-07-19 X Protocol Version 11, Revision 0 Build Operating System: Linux 4.4.0-97-generic armv7l Ubuntu Current Operating System: Linux orangepiplus2e 3.4.113-sun8i #4 SMP PREEMPT Wed Nov 22 13:45:28 CET 2017 armv7l Kernel command line: root=UUID=c9935ecd-9814-4cd9-bfd4-5bf53ea6a1d6 rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=7010ec8c-01 ubootsource=mmc usb-storage.quirks= cma=96M cgroup_enable=memory swapaccount=1 Build Date: 13 October 2017 01:59:44PM xorg-server 2:1.18.4-0ubuntu0.7 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.33.6 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 25 05:45:22 2017 (==) Using config directory: "/etc/X11/xorg.conf.d" (==) Using system config directory "/usr/share/X11/xorg.conf.d" modprobe: FATAL: Module g2d_23 not found in directory /lib/modules/3.4.113-sun8i modprobe: FATAL: Module sunxi_cedar_mod not found in directory /lib/modules/3.4.113-sun8i xf86: found device 0 xf86: found device 0