constantius Posted January 19, 2019 Posted January 19, 2019 Just for info from cnx-software. Orangepi 3 H6 chip is launched!!!! 0 Quote
guidol Posted January 19, 2019 Posted January 19, 2019 1 hour ago, constantius said: Just for info from cnx-software. Orangepi 3 H6 chip is launched!!!! cnx-software-Link: https://www.cnx-software.com/2019/01/19/orange-pi-3-allwinner-h6-sbc/ Quote from cnx-software: Quote Also note that Armbian provides experimental Ubuntu Bionic and Debian Stretch images for Allwinner H6 boards based on Linux 4.19.x, so Orange Pi 3 will likely be added to the list soon. ...but who want to use a OrangePi with a OrangePi-image? The H6-support of armbian is very limited - so I wouldnt buy a H6-board now Last year I did buy a NanoPi K1 Plus because the H5 is much better supported. The H6 is also "only" a QuadCore A53 like the H5 - so only the newer Mali T720 GFX is the difference. The OPi 3 H6 would be nice for the price if the complete hardware is supported by armbian https://aliexpress.com/store/product/Orange-Pi-3-H6-1GB-LPDDR3-8GB-EMMC-Flash-Gigabyte-AP6256-Bluetooth5-0-4-USB3-0/ 2 Quote
Tido Posted January 19, 2019 Posted January 19, 2019 17 minutes ago, guidol said: The H6-support of armbian is very limited Not armbian, of LINUX. The implementation of the PCI Express controller of H6 is broken, you find more information here and here. (the above text is from Pine64 H6 https://www.armbian.com/pine-h64/ ) Well, at least it is powered via barrel jack == one problem less 1 Quote
guidol Posted January 19, 2019 Posted January 19, 2019 5 minutes ago, Tido said: Not armbian, of LINUX. Of course when it isnt supported fine in LINUX then its even not supported in armbian. So Allwinner or OrangePI itself should deliver better support and informations (or better hardware-design ) 0 Quote
guidol Posted January 19, 2019 Posted January 19, 2019 PS: Why was the "OPi 3 Plus" announced 1.25 years ago and now we do get it as "OPi 3 H6" now (plus is normally the eMMC): 0 Quote
062621AM Posted January 19, 2019 Posted January 19, 2019 3 hours ago, Tido said: Not armbian, of LINUX. The implementation of the PCI Express controller of H6 is broken, you find more information here and here. (the above text is from Pine64 H6 https://www.armbian.com/pine-h64/ ) Well, at least it is powered via barrel jack == one problem less What other hardware is not supported? Is this all the problem H6 has? https://www.armbian.com/pine-h64/ The implementation of the PCI Express controller of H6 is broken USB3 sometimes doesn’t detect high-speed devices properly random MAC limited 3rd party hardware support 0 Quote
Werner Posted January 19, 2019 Posted January 19, 2019 It is the same SoC so yes, it may suffer from all these issues as well. 1 Quote
Tido Posted January 19, 2019 Posted January 19, 2019 5 hours ago, 062621AM said: Is this all the problem H6 has? here you find the overview: https://linux-sunxi.org/Linux_mainlining_effort#Status_Matrix 1 Quote
NicoD Posted January 20, 2019 Posted January 20, 2019 I`m curious about this SoC. I wonder if it`s really 1.8Ghz. How hot it gets. How capable the GPU is. On paper it`s a nice SoC. But if the Linux support is nowhere... I red on LinuxGizmoz that it`s getting full Armbian support. Do they know something more than you guys??? The PineH64 has got 1 big advantage for me. The eMMC socket. I like to keep using my modules. But again no wifi on-board. I wonder why. I`ll meet the founder of PINE64 in 2 weeks. I`ll ask why never wifi on-board. I hope the cortex A55 will be used soon in a good supported SoC. That would be advantage for low powered boards. 0 Quote
hojnikb Posted January 20, 2019 Posted January 20, 2019 Still waiting for the cheaper PC3 variant, but this is one step closer. Nixing pcie, emmc, wifi and usb port (and maybe x2 usb2 / x2 usb3 setup) together with simpler pcb i can see this at ~25$ or perhaps even 20$. That would make it an awesome ultra budget NAS setup, capable of gigabit speeds. Obviously, once H6 support is ironed out. 0 Quote
vlad59 Posted January 20, 2019 Posted January 20, 2019 55 minutes ago, hojnikb said: Still waiting for the cheaper PC3 variant, but this is one step closer. Nixing pcie, emmc, wifi and usb port (and maybe x2 usb2 / x2 usb3 setup) together with simpler pcb i can see this at ~25$ or perhaps even 20$. That would make it an awesome ultra budget NAS setup, capable of gigabit speeds. Obviously, once H6 support is ironed out. almost agree with you... I'll be keeping emmc. About USB, If I remember correctly H6 only has 1USB2 and 1USB3 so just those too would be good (no need for internal usb hubs). 0 Quote
hojnikb Posted January 21, 2019 Posted January 21, 2019 18 hours ago, vlad59 said: almost agree with you... I'll be keeping emmc. About USB, If I remember correctly H6 only has 1USB2 and 1USB3 so just those too would be good (no need for internal usb hubs). yeah, less usbs would help with cost. maybe 2x usb2 (use one from usb otg) and 1x usb3 (no need for a hub). Id reserve emmc option for PC3+ model. 0 Quote
Werner Posted January 23, 2019 Posted January 23, 2019 On 1/20/2019 at 3:02 PM, NicoD said: I`m curious about this SoC. I wonder if it`s really 1.8Ghz. How hot it gets. How capable the GPU is. Yes. In the early days, about linux 4.17 when the first initial support for Allwinner H6 from Armbian came, it was limited to 1,5GHz but I remember a patch for 4.18 which rised the max frequency to 1810MHz and it ran well. I did benchmark without cooling whatsoever and it survived. Over a longer period of time on heavy load I would think about some kind a cooling though, 1 Quote
062621AM Posted January 23, 2019 Posted January 23, 2019 How likely that OrangePi will release an Armbian image for this? Still waiting for LibreComputer to send La Fries backers survey for address.. 0 Quote
martinayotte Posted January 23, 2019 Posted January 23, 2019 4 hours ago, 062621AM said: How likely that OrangePi will release an Armbian image for this? The OPi-H6 boards are WIP (aka "Work in Progress"), this means you need to build the images yourself. It is pretty straight forward : https://docs.armbian.com/Developer-Guide_Build-Preparation/ 1 Quote
krachlatte Posted February 7, 2019 Posted February 7, 2019 hi so we need a new device tree for this board is that correct ? i have setup a build maschine in a virtual box, ornagepi image is building fine and also armbian is building fine for H6 ornagepi one pus and lite2... let me now if i could help in any way to get armbian porteted on this H6 orangepi 3 0 Quote
Werner Posted February 8, 2019 Posted February 8, 2019 Just to see Armbian is building fine this does not mean it will run properly or even boot 0 Quote
Igor Posted February 8, 2019 Posted February 8, 2019 9 hours ago, krachlatte said: hi so we need a new device tree for this board is that correct ? Correct. Probably nobody made it yet - check https://groups.google.com/forum/#!forum/linux-sunxi and LKML. 9 hours ago, krachlatte said: let me now if i could help in any way to get armbian porteted on this H6 orangepi 3 Create a u-boot config, u-boot DT following by kernel DT. With a patch ... there are a few real world example in the script under patch/ directory. Use most similar board basic functions (UART, MMC, USB) as a template ... beware that HDMI out on H6 is broken in NEXT 4.19.y ... but works on DEV 4.20.y ... overall H6 support is WIP. 0 Quote
krachlatte Posted February 8, 2019 Posted February 8, 2019 1 hour ago, Werner said: Just to see Armbian is building fine this does not mean it will run properly or even boot but this is good to know not to have problems with ther builidng mashine itself... 0 Quote
krachlatte Posted February 8, 2019 Posted February 8, 2019 1 hour ago, Igor said: Correct. Probably nobody made it yet - check https://groups.google.com/forum/#!forum/linux-sunxi and LKML. Create a u-boot config, u-boot DT following by kernel DT. With a patch ... there are a few real world example in the script under patch/ directory. Use most similar board basic functions (UART, MMC, USB) as a template ... beware that HDMI out on H6 is broken in NEXT 4.19.y ... but works on DEV 4.20.y ... overall H6 support is WIP. 1 hour ago, Igor said: Correct. Probably nobody made it yet - check https://groups.google.com/forum/#!forum/linux-sunxi and LKML. Create a u-boot config, u-boot DT following by kernel DT. With a patch ... there are a few real world example in the script under patch/ directory. Use most similar board basic functions (UART, MMC, USB) as a template ... beware that HDMI out on H6 is broken in NEXT 4.19.y ... but works on DEV 4.20.y ... overall H6 support is WIP. thanks, i will have a look, if i am able to do this myself.. 0 Quote
krachlatte Posted February 8, 2019 Posted February 8, 2019 Hi, i started to dig into the source code of the kernel from Sunxi, i could find that the kernel that is compilied the one from the oneplus is used.. i ordered one orange pi 3 2gb Ram 8GB eemc, so still quit exciteted best regards 0 Quote
krachlatte Posted February 9, 2019 Posted February 9, 2019 Hi, i got a problem with compling the dts files for the orangepi 3 to the dtb file, were is it documented to do it for the amrbian build ? best regards 0 Quote
krachlatte Posted February 9, 2019 Posted February 9, 2019 1 hour ago, krachlatte said: Hi, i got a problem with compling the dts files for the orangepi 3 to the dtb file, were is it documented to do it for the amrbian build ? best regards found the stupid problem..... 0 Quote
guidol Posted February 10, 2019 Posted February 10, 2019 7 hours ago, krachlatte said: found the stupid problem..... please tell us the solution 0 Quote
Igor Posted February 10, 2019 Posted February 10, 2019 On 2/8/2019 at 9:48 AM, krachlatte said: with ther builidng mashine itself. Build machine is just a tool. If there is no support for the board in u-boot or kernel, you have to solve that part first. Tool only helps you, but the problem still remain complex. In some cases, when a board is totally new, this easily represents months of work. In this particular case, this means you will take orangepioneplus or pineh6 configs and adjust them for this board ... Also not exactly straightforward, but at least it should not be months of work. 0 Quote
krachlatte Posted February 10, 2019 Posted February 10, 2019 5 hours ago, guidol said: please tell us the solution i mist a " at the end, .... in the dts file and thats whta i did so far igor i copied over the oneplus config and dts files, now the image builds, and i can start makeing chages to the device tree for orange pi3... 1 Quote
krachlatte Posted February 10, 2019 Posted February 10, 2019 (edited) Spoiler [ o.k. ] Calling image customization script [ customize-image.sh ] [ o.k. ] Preparing image file for rootfs [ orangepi3 bionic ] [ o.k. ] Current rootfs size [ 839 MiB ] [ o.k. ] Creating blank image for rootfs [ 1056 MiB ] 1,03GiB [ 337MiB/s] [=================================================================================================================================================================================================================================================================================================>] 100% [ o.k. ] Creating partitions [ root: ext4 ] [ .... ] Creating rootfs [ ext4 on /dev/loop21p1 ] [ .... ] Updating initramfs... [ update-initramfs -uv -k 4.20.7-sunxi64 ] [ o.k. ] Updated initramfs. [ for details see: /home/memyselfandi/buildstuff/armbian/output/debug/install.log ] [ .... ] Copying files to root directory 773.84M 99% 24.63MB/s 0:00:29 (xfr#27935, to-chk=0/35772) sent 775.97M bytes received 563.67K bytes 25.46M bytes/sec total size is 780.44M speedup is 1.01 [ .... ] Copying files to /boot directory 36.32M 99% 221.86MB/s 0:00:00 (xfr#86, to-chk=0/93) sent 36.34M bytes received 1.68K bytes 24.23M bytes/sec total size is 36.32M speedup is 1.00 [ o.k. ] Free space: [ SD card ] Filesystem Size Used Avail Use% Mounted on udev 7,9G 0 7,9G 0% /dev tmpfs 1,6G 1,4M 1,6G 1% /run /dev/sda1 196G 39G 148G 21% / tmpfs 7,9G 0 7,9G 0% /dev/shm tmpfs 5,0M 4,0K 5,0M 1% /run/lock tmpfs 7,9G 0 7,9G 0% /sys/fs/cgroup /dev/loop0 15M 15M 0 100% /snap/gnome-logs/37 /dev/loop1 3,8M 3,8M 0 100% /snap/gnome-system-monitor/51 /dev/loop2 189M 189M 0 100% /snap/gitkraken/136 /dev/loop6 54M 54M 0 100% /snap/core18/677 /dev/loop8 239M 239M 0 100% /snap/kde-frameworks-5-core18/26 /dev/loop4 2,4M 2,4M 0 100% /snap/gnome-calculator/180 /dev/loop7 87M 87M 0 100% /snap/core/4917 /dev/loop5 141M 141M 0 100% /snap/gnome-3-26-1604/70 /dev/loop9 768K 768K 0 100% /snap/kompare/16 /dev/loop10 35M 35M 0 100% /snap/gtk-common-themes/818 /dev/loop3 35M 35M 0 100% /snap/gtk-common-themes/319 /dev/loop11 15M 15M 0 100% /snap/gnome-logs/45 /dev/loop12 3,8M 3,8M 0 100% /snap/gnome-system-monitor/57 /dev/loop13 768K 768K 0 100% /snap/kompare/15 /dev/loop14 91M 91M 0 100% /snap/core/6350 /dev/loop15 189M 189M 0 100% /snap/gitkraken/135 /dev/loop16 2,3M 2,3M 0 100% /snap/gnome-calculator/260 /dev/loop18 13M 13M 0 100% /snap/gnome-characters/103 /dev/loop17 141M 141M 0 100% /snap/gnome-3-26-1604/74 /dev/loop19 92M 92M 0 100% /snap/core/6259 /dev/loop20 13M 13M 0 100% /snap/gnome-characters/139 tmpfs 1,6G 32K 1,6G 1% /run/user/1000 tmpfs 11G 839M 9,7G 8% /home/memyselfandi/buildstuff/armbian/.tmp/rootfs-dev-orangepi3-bionic-no /dev/loop21p1 1004M 854M 114M 89% /home/memyselfandi/buildstuff/armbian/.tmp/mount-dev-orangepi3-bionic-no [ o.k. ] Writing U-boot bootloader [ /dev/loop21 ] [ o.k. ] Done building [ /home/memyselfandi/buildstuff/armbian/output/images/Armbian_5.75_Orangepi3_Ubuntu_bionic_dev_4.20.7.img ] [ o.k. ] Runtime [ 16 min ] ported the dts files form the source code from orangepi, building looks ok....., now i am waiting for the hardware to arrive to check if this boots ... and if i ported corectly, i found that the gpio.h is diffrent from 3.xx kernel to 4.20.xx so wiwill see once hw has arrived Edited February 11, 2019 by Tido added spoiler - for better reading, please do that yourself next time. thx 0 Quote
krachlatte Posted February 10, 2019 Posted February 10, 2019 Hi, i created a git repository for this https://github.com/krachlatte/armbian-orangepi3 please feel free to download the two images and let me know if it even boots, i will upload my source code (DTS) in the coming days... 0 Quote
gnjack Posted February 10, 2019 Posted February 10, 2019 Thanks for the image krachlatte, unfortunately it does not boot. No LEDs or HDMI, here is the (very short) UART serial debug output from the Orange Pi 3: U-Boot SPL 2018.09-rc1-armbian (Feb 10 2019 - 13:58:07 +0100) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL31: v2.0(debug):32bcba0 NOTICE: BL31: Built : 23:07:19, Feb 8 2019 NOTICE: BL31: Detected Allwinner H6 SoC (1728) NOTICE: BL31: Found U-Boot DTB at 0xc070e20, model: OrangePi 3 INFO: ARM GICv2 driver initialized NOTICE: PMIC: Probing AXP805 NOTICE: PMIC: AXP805 detected INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for 855873 was applied INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 0 Quote
Samon Posted February 11, 2019 Posted February 11, 2019 Hi krachlatte, I have downloaded and flashed your base image and it does not boot for me - no LED activity at all (the 'official' images from http://www.orangepi.org/downloadresources/ boot just fine). 0 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.