Rockchip
Quick links to search tags:
Banana Pi M7, BIGTREETECH CB2, Khadas EDGE2, Libre Renegade, NanoPC T6 LTS, NanoPi M5, NanoPi M6, NanoPi R3S LTS, NanoPi R4S, NanoPi R6S, NanoPi R6C, NanoPi R76S, Odroid M1, Orange Pi 4 LTS, Orange Pi 5, Orange Pi 5 Plus, Pinebook Pro, ROCK 5A, ROCK 5B, ROCK 5C, ROCK 5 ITX, ROCK PI E, ROCK PI S, ROCK S0, Zero 3W/3E, RockPRO64, Tinkerboard
-
Expected behavior: rastered content is smooth like so: Observed behavior: rasterization is very pixelated: Workaround: go to about:flags and change #enable-gpu-rasterization to disabled, however this makes sites such as geogebra.org/calculator run very slow.
-
Reputation Points
- 1 reply
- 1.8k views
-
-
While exploring my Info Center, I stumbled across this screen: If there are other users who use a Samsung SSD 980 PRO 2TB, they may also be interested in following this link: https://www.pugetsystems.com/support/guides/critical-samsung-ssd-firmware-update/
-
Reputation Points
- 4 replies
- 3.5k views
-
-
Sorry, if this is not odroid specific but I don't know if this issue is a armbian generic one: I guess also in armbian running apt update && apt upgrade is the correct way to install updates? When I run that from a Armbian 23.02.2 system I will get a Ubuntu 22.04 afterwards. before: cat /etc/issue Armbian 23.02.2 Jammy \l after: lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 22.04.2 LTS Release: 22.04 Codename: jammy Similar question: What is the intended way to do an armbian upgrade? I did not find any hint in the documentation. In my current use case insta…
-
Reputation Points
- 3 replies
- 3.1k views
- 1 follower
-
-
This has happened now on identical brand new boards, new EMMCs, also on SD, identical 5a factory PSU, factory heatsink. OS is Armbian, and it has happened on current desktop and server. This last time I had completed several successful reboots and thought maybe I just hadn't been pushing the plug in all the way. Then it happened again. Prior attempts have been on EMMC, directly burned with Etcher, and brand new Sandisk Ultra in package with bubble. The behavior is while the board is running, white light flashing, system munching it just dies. Throws no errors. Just quits. Green light never goes out. I was tailing the emby log when it crashed this time. N…
-
Reputation Points
- 1 reply
- 2.7k views
- 1 follower
-
-
Hi Team, Greetings. I am using OPi4 LTS Emmc with 16 GB version. kernel: Linux orangepi4-lts 5.15.93-rockchip64 #23.02.2 SMP PREEMPT Fri Feb 17 23:48:36 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux. installed Armbian in Emmc worked like charm. Issue: I connected the SSD WD SN570 and format with nand -sata-install on Armbian to boot and use SSD boot. then I got successful msg all done and ready to reboot. once after the reboot I got this msg. then I tried root it doesn’t work and control-d comes back to same screen. Troubleshooting with a gentleman's assistance: 1. Booted wit…
-
Reputation Points
- 5 replies
- 4.5k views
- 1 follower
-
-
I have no sound over hdmi with my Orange pi 5. I have tried installing alsamixer and alsatools but this reports no settings to adjust. I have looked in files-boot-config for the sound settings and line 5242 says HDMI analogue is not set. I tried altering that to =y but I am not allowed to alter anything here and save it, ( oh how linux loves denying you permission). Does anyone know how to apply some common sense to this, why do the Armbian developers think it is a good idea not to have sound over HDMI, there is no option at al to select this in sound settings. Yours extremely miffed.
-
The OPI5 has an onboard RTC. On the back of the board near the RTC chip there are two pcb "test points". One says RTC1, the other says GRD1, I would assume a CR2032 could be connected to those points to maintain RTC function. I don't dare do anything till I get a solid answer. Can anyone give me any feedback as to options.
-
-
Have anyone experience with 3rd party module connection with SPI to Opi5? I'm running Linux orangepi5 5.10.110-rockchip-rk3588 #23.02.2 SMP. I add spidev device using armbian-config (opi-spi4-m0-cs1-spidev) verbosity=1 bootlogo=false overlay_prefix=rockchip-rk3588 fdtfile=rockchip/rk3588s-orangepi-5.dtb rootdev=UUID=6fc3824e-c6c2-4781-8807-20e5a4bfc432 rootfstype=ext4 overlays=opi5-spi4-m0-cs1-spidev Two devices appears - crwxrw-rw- 1 root root 153, 0 Apr 17 10:55 /dev/spidev4.0 crwxrw-rw- 1 root root 153, 1 Apr 17 10:55 /dev/spidev4.1 Internal loopback test with spidev_test works w/o problem if I put wire MOSI <-> MISO. …
-
Hi all, After a restart and after a few days go by my My Orange Pi 4 LTS randomly loses its ability to make outbound network connections. I can ssh into the box, however for some reason the routing tables are empty: > ping 192.168.1.53 ping: connect: Network is unreachable > netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface The box is connected through an ethernet cable, configured to used DHCP, but I see no IPv4 address in the interface configuration: > ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 2a01:cb15:81c2:e5…
-
Reputation Points
- 0 replies
- 2.7k views
- 1 follower
-
-
My orange pi 5 armbian Os isn’t displaying hdmi output to my monitor. However, it works on my flat screen tv, any reason why this might be ?
-
Reputation Points
- 1 reply
- 1.9k views
-
-
In the most recent builds, the kernel logs have been flood with Mar 02 21:31:38 kitchen-opi kernel: [drm:rockchip_vop2_mod_supported] *ERROR* Unsupported format modifier 0x800000100000351 Mar 02 21:31:38 kitchen-opi kernel: [drm:rockchip_vop2_mod_supported] *ERROR* Unsupported format modifier 0x800000100000351 Mar 02 21:31:38 kitchen-opi kernel: [drm:rockchip_vop2_mod_supported] *ERROR* Unsupported format modifier 0x800000100000351 Mar 02 21:31:38 kitchen-opi kernel: [drm:rockchip_vop2_mod_supported] *ERROR* Unsupported format modifier 0x800000100000351 Mar 02 21:31:38 kitchen-opi kernel: [drm:rockchip_vop2_mod_supported] *ERROR* Unsupported format modifier 0x8…
-
Reputation Points
- 1 reply
- 2.6k views
- 1 follower
-
-
Hi all Armbian fans, As of today, I checked officially platinum supported Armbian version for Orange Pi 5. I was amazed how low performing is armbian image. I was using latest armbian with HW install procedure at: https://redirect.armbian.com/orangepi5/Jammy_legacy_gnome , and Ubuntu from https://github.com/Joshua-Riek/ubuntu-orange-pi5/releases/download/v1.11/ubuntu-22.04-preinstalled-desktop-arm64-orange-pi5.img.xz Both glxinfo -B says: Accelerated : yes Armbian glmark2 Score: 705 Ubuntu glmark2 Score: 1285 Difference is HUGE When we could expect any "normal" Mali…
-
Hey there, I now have my Nanopi R4S for quite a while but never got it to run stable over a longer period of time. Now I finally connected another board to its debug serial in the hopes to catch something that causes the board to freeze. Well this is what I have collected: https://p.na4.eu/?bc818aefadc9b5b2#DAunYKXghkaqcLhh8SLWMKTWABewpwPJRnHMHDemR98Y The log is complete, there is nothing missing between 08:51 and 19:14. This is how I collected it. Basically during the state of throwing errors the board becomes unresponsitive and continously heats up. Active cooling was in place so no danger of overheating. https:/…
-
Orange PI 5 doesn't boot after firmware update using ARMBIAN beta tool. There isn't so much documentation, as this board is new. How to recover the firmware?
-
Reputation Points
- 14 replies
- 22.9k views
- 1 follower
-
-
I have issues enabling hardware acceleration on Debian CLI, anyone had same problem? can someone give a tutorial?
-
Reputation Points
- 5 replies
- 2.9k views
- 2 followers
-
-
Hey, I'm experiencing graphics failures, accelerated decoding problems, flickering window decorations and shell hangups in Plasma. All events are associated with syslog entries: dma-pl330 fea30000.dma-controller: pl330_submit_req:1738 Try increasing mcbufsz (258/256) dma-pl330 fea30000.dma-controller: fill_queue:2264 Bad Desc(2) I've attached the whole system log in case someone is interested. Running Armbian 23.02.2 Jammy Linux orange 5.10.110-rockchip-rk3588 #23.02.2 SMP Fri Feb 17 23:59:20 UTC 2023 aarch64 Panfrost-mesa updated to HEAD. A very similar problem occurs with Orange Pi 5 Debian ready distro images, but …
-
Reputation Points
- 5 replies
- 4.3k views
-
-
I have a few questions, because I cant find any documentation about what is broken or not. Why does /dev/rga not exist? USB-OTG does not seem to be working at the moment? Is MPP enabled in the current kernel? When is SPI boot coming out? Still love armbian though!
-
Reputation Points
- 3 replies
- 4.2k views
-
-
i was not able to build RTL8821CU driver, keep getting the following error : /usr/bin/aarch64-linux-gnu-ld: drivers/net/wireless/rtl8811cu/core/crypto/aes-internal-enc.o: in function `aes_encrypt': aes-internal-enc.c:(.text+0x74): multiple definition of `aes_encrypt'; lib/crypto/aes.o:(.text+0x7c4): first defined here make: *** [Makefile:1286: vmlinux] Error 1 There seems to be a duplicate implementation of aes_encrypt function between rtl8811cu source code and linux_rockchip64 kernel source code which blocking the armbian build. any suggestion how to fix this ?
-
Reputation Points
- 2 replies
- 3.8k views
-
-
Here in the forum the psu mod for the roc-rk3328-cc board was discussed. Does anyone know where I can find instructions on how to do this exactly?
-
How can I make sure my /boot is protected against power failure making eMMC of Tinkerboard corrupted? Is it possible to mount read-only /boot while leaving the rest of FS writeable? I know about Overlay root FS, it's OK, but I need to protect only boot. Please help to mount it properly. Thanks!
-
Hi, I have the board connected by HDMI to a TV but when I start I have no sound, I have to go to the speaker icon, configuration and the option is always selected "Speakers - internal audio" but if I want to have sound I have to choose the output option "Analogic ouput- internal audio" and if I restart I have to do the process again. According to the fine adjustment guide of ARMBIAN I must execute the command pacmd list-sinks | less And should be marked with * the selected card but none appears with that symbol. I attach the terminal output after selecting the right output on the desktop to have sound to see if someone is so kind to help me solve my problem. Thanks a…
-
Reputation Points
- 0 replies
- 2.3k views
- 1 follower
-
-
Hello! I have bought Odroid M1 and installed arbian Image Armbian BullseyeCLI it works great but after installing OMV using armbian-config and rebooting the is no network available. If i run ap addr i get for the LAN adapter following: eth0: <BROADCAST.MULTICAST> mtu 1500 qdisc noo state DOWN qlen 1000 How can this be fixed? When I reboot the system it gets stuck on network configuration writing "A start job is running for Wait for Network to be Configured. I wait two minutes and then the system boots without network. The only chance to get network back is to run omv-firstaid and configure it or run following commands in the terminal …
-
Hello, i just bought new display from orangepi. But i have problem get it work with armbian 23 jally with kernel 5.15. I try get files from orange pi os with no success. Does somebody have working dts for this type of display ? Orange Pi RK3399 10.1inch LCD Touch Screen & Display Panel screen - OP1102 DTS
-
I'm looking to try an OPi5 for GPGPU. After seeing trunk recently added the patches needed to use the "gofaster" option for panfork, and having seen reports of glmark2 scores of 4000 and 5000 while never coming close to that myself, I decided to pull together the various bits of info out there and just try all of the options. A number of things done below are often described vaguely -- hopefully it's helpful here to lay out a concrete set of steps to follow and what to expect. There are two options for accelerated video: panfork and ARM's closed source "blob" driver. With either option, it sounds like you should switch from X11 to Wayland. If you are looking a…
-
Reputation Points
- 17 replies
- 38.9k views
- 1 follower
-
-
I have tried to activate CANBUS using "armbian-config", but it does not appear in /dev/, neither with i2c
-
Reputation Points
- 8 replies
- 11k views
- 1 follower
-
-
Hey there, first of all: THANKS for the armbian project! My issue is with an M1, fresh jammy xfce install on an sd-card. NVME is installed (can be accessed after mounting it manually, no issues there) Wishing to move system to this /dev/nvme0n1, keeping boot on the sdcard, as I understand this being the only viable option, currently. When using armbian-install, selectin option 1 "Boot from SD - system on SATA, USB or NVMe" and confiming, next is an error message: --- There is not enough free capacity on /dev/nvme0n1. Please check your device. --- Did so, tried creating an empty (…
-
Reputation Points
- 2 replies
- 3.6k views
- 1 follower
-
-
I'm really struggling to get chromium to work correctly with hardware acceleration. 1) I have custom kernel image from master branch last week. Which maybe could cause some issues? 2) I added the two repos (panfork and mesa) sudo add-apt-repository ppa:liujianfeng1994/panfork-mesa sudo add-apt-repository ppa:liujianfeng1994/rockchip-multimedia 3) I've ran all the updates 4) I installed ubuntu desktop to enable Wayland which is working nicely 5) I've added the HDMI audio output 6) My default chromium configuration does already have the egl enabled. When I start Chromium, I get the following errors 39610:39643:0125/091804.694008:ERR…
-
Reputation Points
- 17 replies
- 31.5k views
- 1 follower
-
-
Please advise what patch can I apply during compilation of Armbian Jammy for Tinkerboard S R2.0 to completely hide u-boot logo and messages? And where the patch should be placed? There are many folders in /home/max/build/patch/u-boot/ Thanks!
-
Reputation Points
- 34 replies
- 13.4k views
- 2 followers
-
-
I try to install chromium and get this: root@tinkerboard:~# sudo apt install chromium-browser Reading package lists... Done Building dependency tree... Done Reading state information... Done The following NEW packages will be installed: chromium-browser 0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded. Need to get 0 B/49.2 kB of archives. After this operation, 165 kB of additional disk space will be used. Preconfiguring packages ... (Reading database ... 41567 files and directories currently installed.) Preparing to unpack .../chromium-browser_1%3a85.0.4183.83-0ubuntu2.22.04.1_armhf.deb ... => Installing the chromium snap ==> Checking conne…
-
Reputation Points
- 5 replies
- 6.4k views
-
-
I thought it would be easy, but I am now turning in circles, so I am asking here. I have a working system booting on NVME (when no SD card inserted), with two partitions nvme0p1 (256Mb) and nvmeop2 (40Gb) I would like to clone my working system on a SD card. How shall I proceed? I am not asking details instruction, only the rough path I should follow (e.g. dd partitions, tune2fs ......). PS: I thought it would be easy, but whatever I do, the system keep taking /boot on the nvmeop1, so I really struggle to boot on the /boot of the SD card
-
While I was waiting for my OPI5 to arrive, I searched for which OS to install, in this search I found Armbian. ----------------------------------------------------------------------------------------------------- Armbian 23.02 Jammy "CLI" https://redirect.armbian.com/orangepi5/Jammy_legacy Size: 499M, Release date: Feb 27, 2023 ----------------------------------------------------------------------------------------------------- Armbian Bullseye "CLI" https://redirect.armbian.com/region/EU/orangepi5/Bullseye_legacy Size: 427M, Release date: Feb 27, 2023 ---------------------------------------------------------------------------------…
-
Reputation Points
- 5 replies
- 3.3k views
- 1 follower
-
-
Hello!! I got Dolphin running under Armbian and it seems its mainly GPU bound for the games that Iv'e tested. I am aware that the Panfrost drivers are not optimal but I thought I'd like to try and squeeze a few extra fps out of this setup by overclocking the GPU if that's possible. Is it? And does anyone know how I can do that? Cheers!
-
I've burned the latest Focal image onto Renegade board. Everything works fine except rebooting it via command. Once the reboot is entered, the console log showed it tried to reboot but stuck with the following info. The above Armbianmonitor is a zip file, please download it and save as zip file then unzip to get the detail log. I guess it was due to issue in dtb file but has no clue. Is there any genius can help on this? [ 97.418882] watchdog: watchdog0: watchdog did not stop! [ 97.672510] reboot: Restarting system INFO: PSCI Power Domain Map: INFO: Domain Nod State ON (0x0) INFO: Doma parent_node 0, State ON (0x0) e …
-
I'm struggling to get my Orange Pi 5 to boot to NVMe with Armbian 23.02 Bullseye CLI. With armbian-install I picked: 4 Boot from MTD Flash - system on SATA, USB or NVMe then install to /dev/nvme0n1p1, followed by updating the bootloader on mtdbblock0, and then powering off. When I remove the SD drive, and reboot. The console remains blank. When I insert the SD drive, and reboot again, the system comes up, and I can mount /dev/nvme0n1p1: $ df -h Filesystem Size Used Avail Use% Mounted on udev 7.7G 0 7.7G 0% /dev tmpfs 1.6G 9.6M 1.6G 1% /run /dev/mmcblk1p2 30G 2.0G 27G 7% / tmpfs …
-
Hi I am wondering if anyone has had any luck using a mini PCIe to SATA adapter with an Orange Pi 4 LTS to attach a SATA hardrive? If yes, which adapter did you use? I would like to throw the OPi 4 LTS and a hard drive in a box and make a mini fanless NAS box. thanks
-
Reputation Points
- 0 replies
- 2.8k views
- 1 follower
-
-
What do I need to do to fix this error? Here is some information: root@orangepi5 ~# lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 22.04.2 LTS Release: 22.04 Codename: jammy root@orangepi5 ~# root@orangepi5 ~# uname -a Linux orangepi5 5.10.110-rockchip-rk3588 #23.02.2 SMP Fri Feb 17 23:59:20 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux root@orangepi5 ~# root@orangepi5 ~# apt install -y bpfcc-tools libbpfcc-dev python3-bpfcc libbpfcc Reading package lists... Done Building dependency tree... Done Reading state information... Done The following additional packages will be installed: ieee-data libclang-cpp11 libllvm11 python3-n…
-
Reputation Points
- 0 replies
- 3.1k views
- 1 follower
-
-
I've tried to reinstall multiple times. Armbian runs fine and i am able to SSH and do everything on it, but hdmi display plugged in gets no signal. I installed Armbian 22.11 Jammy XFCE and non. Both give me no output. I'm using a big enough power supply, and nothing. I am attaching the output i got on the armbianmonitor U http://paste.debian.net/1270237/
-
I decided to try the new Armbian 23.02 Jammy Gnome build and after booting with my SD card, the process gets to a point where it presents a prompt orangepi5 login: and whatever I attempt to enter returns as an incorrect login. I can't find any specific documentation which indicates the default login credentials for this build.
-
Has anyone run a comparison benchmark of Armbian vs. the Orange pi versions of Debian and Ubuntu? ...Curious to see the results of optimizations.
-
Reputation Points
- 1 reply
- 3.4k views
- 1 follower
-
-
Hello all! In Orange Pi OS latest image all works well EXCEPT it keeps launching apps in a stupid bordered window that has a huge obnoxious bar at the top with 2 absolutely useless buttons, a window to full screen option and the X button How do I hide this stupid thing? It's blocking the whole top of my screen and cutting off part of my TiviMate Pic here https://imgur.com/a/8uo8WrM
-
Reputation Points
- 2 replies
- 2.1k views
- 1 follower
-
-
Hi, Wifi stops working after some time. Output from armbianmonitor -u : https://paste.armbian.com/iqukawifes Only reboot help. In dmesg I see: [ 6793.969484] WCN: stop_loopcheck [ 6806.513278] sprdwl:[WIFI_CMD_TX_DATA]timeout [ 6806.514120] sprdwl:ctx_id:0 cmd: WIFI_CMD_TX_DATA[72] rsp timeout (mstime = 6802912), num=3304 [ 6809.589395] sprdwl:[WIFI_CMD_TX_DATA]timeout [ 6809.589823] sprdwl:ctx_id:0 cmd: WIFI_CMD_TX_DATA[72] rsp timeout (mstime = 6805981), num=3305 [ 6812.661554] sprdwl:[WIFI_CMD_TX_DATA]timeout [ 6812.661979] sprdwl:ctx_id:0 cmd: WIFI_CMD_TX_DATA[72] rsp timeout (mstime = 6809057), num=3306 [ 6812.662786] sprdwl:sprdwl_atcmd_assert…
-
Reputation Points
- 5 replies
- 5.4k views
- 1 follower
-
-
I was using the nightly version 23.02.2 but now the repos have changed. How can I update to the new nightly repo os ? https://github.com/armbian/os # PLEASE DO NOT EDIT THIS FILE BOARD=odroidm1 BOARD_NAME="ODROID M1" BOARDFAMILY=rk3568-odroid BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=1a8daf0 VERSION=23.02.2 LINUXFAMILY=rk3568-odroid ARCH=arm64 IMAGE_TYPE=nightly BOARD_TYPE=wip INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=Image BRANCH=edge Thanks !
-
Hello, Some weeks ago, I installed the kinetic version. It was rooted on the nvme drive and was working decently. After some explanations on this forum, I decided to install the LTS version. I burned a new SD card, inserted it and powered on. I was never prompt about where to install the system. After installation, the df command shows that the system is installed on the sd card. I can see nvme partitions in /dev but they aren't mounted. nvme is partitionned in two parts : one for the system, the other one is crypted and dedicated to data. How should I do? Thanks Julien
-
Hello!! I just got my Orange Pi 5 the other day and am trying to 'port' a program I've been working on for RPi4b over to this new board. The program is using ffmpeg to decode h264 and hevc video streams. My main question is how do I need to configure the ffmpeg codex context and formats to make use of (ideally zero copy) HW accelerated video decode on Orange Pi 5? For the raspberry code I was using these: avcodec_find_decoder_by_name("hevc"); and avcodec_find_decoder_by_name("h264_v4l2m2m"); together with codec_context->pix_fmt = AV_PIX_FMT_DRM_PRIME; // for zero copy video path But this does not work when compil…
-
In the original PR for Orange PI 5 I recall someone mentioned that the Jammy had somekind of glitch with USB on the OPI5 but is that still the case? From the threads here, it looks like the distribution has many patches and fixes. Is Bullseye the recommended distribution?
-
Reputation Points
- 2 replies
- 8.1k views
- 1 follower
-
-
I was running on Armbian_23.02.0-trunk.0112_Orangepi5_jammy_legacy_5.10.110_cinnamon_desktop. For the most part, it worked but the mouse cursor would randomly disappear while remaining functional but invisible. I tried to upgrade using apt-get update and apt-get full-upgrade and after a reboot, it now just displays a flashing underscore. I can SSH into the OS so it's partially functional. Shows as Armbian 23.02.2 Jammy with Linux 5.10.110-rockchip-rk3588 Contents of boot.log: ------------ Mon Feb 27 07:24:15 PST 2023 ------------ done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running…
-
Howdy, I am in desperate need of help getting this dang usb wifi dongle working on my orange pi 5. I am new to sbc and fiarly new to linux. I have tried multiple github drivers with freash OS installs, all to no avail. Time spent trying to get it to work is reaching close 20 hours, across multiple forums, github searches, videos, linux how to site, and armbian site itself. I'm either missing something or an idiot cause i can't figure out this "make" or "dkms" command stuff out for compiling the driver and installing it. My last resort is asking for y'all for help before i feed this thing to my dog... "joke". My most recent attempt is from the git h…
-
Reputation Points
- 3 replies
- 3.6k views
- 2 followers
-
-
Anybody with a Tinker Board with a Gpu could run an inference for me? I need a benchmark for my thesis.
-
Reputation Points
- 1 reply
- 2.6k views
- 1 follower
-
-
Hi all, recently I installed the Mali GPU Drivers from the instructions on the official Armbian website. I have Armbian 23.02.2 Jammy installed, with KDE Plasma desktop. I found two problems: 1. The mouse flickers when I move it. This happens on both XFCE and Plasma (X11) 2. Every once in a while, the Plasma panels freeze and I have to reboot my OPI to get it to work. This also happens if I right-click on it and press "Enter Edit Mode". If I don't do that, it freezes randomly (afaik). This affects both the panels and the background (panels don't update, can't interact, cannot right-click). Does anyone know of any solutions to this? Thanks!
-
Reputation Points
- 7 replies
- 7.7k views
- 2 followers
-
-
Hi, Im pretty new to linux in general mostly used windows before. Is there a way to get waydroid work on armbian? I installed it but waydroid sais that the binder kernels are missing (1). When I follow the instruction to install the kernel modules using dkms I also get a failure (2). (1) ERROR: Binder node "binder" for waydroid not found (2) Error! Bad return status for module build on kernel: linux-headers-5.10.110-rockchip-rk3588 Anyone can help me with this? Thanks in advance!
-
Reputation Points
- 27 replies
- 17.9k views
- 1 follower
-
-
Hello, running Armbian_22.11.2_Odroidm1_bullseye_edge_6.1.0.img.xz + updates. I saw in other post (/topic/17418-cameras-with-rock-pi-4-c/😞 But I do not see any Hardware menu in System. I had a look to armbian-config and saw that there is a lot of device-specific code and probably odroidm1 is not supported yet. Also I searched for some DTB that may work, but none is shipped with the current kernel: is empty. Should I add explicit support like in this patch: https://github.com/armbian/build/pull/1482/files? Or there are more modern way to add cold-pluggable hardware? Thanks in advance for your suggestions!
-
Reputation Points
- 0 replies
- 2.9k views
- 1 follower
-
-
At first, the card was recognized as a Mass Storage, I used usb_modeswitch to make it recognized as a wifi card, but iwconfig still didn't show this card, and /sys/kernel/debug/ieee80211 did exist, but was empty. I don't think it's a driver issue because when I plugged this card into my debian laptop, it worked even without usb_modeswitch. journalctl and lsusb logs are in the files. journalctl.log lsusb.log
-
Reputation Points
- 0 replies
- 2.5k views
- 1 follower
-
-
I am waiting on my opi5 but was already investigating how to run Roblox (an x86 32 bit Windows game) on it. Grapejuice + box86 + wine could do the trick and saw this interesting script: https://github.com/NicoD-SBC/armbian-gaming Will this be working for opi5 too or is it specific to rk3399 (saw that in some compiler flags)? Anybody experience or an updated installer script? Related info: This YouTube channel covers examples of running games on rk3588 (rock5b) making me believe performance could be quite good: https://youtube.com/@TheByteman
-
I have Rock Pi S V13, that has 4 UART ports. I'm already connecting to the board via serial console on /dev/ttyS0. How can I find out what are the other ports assignments/paths? I have tried to use a Python script to detect the output by using an FTDI to USB board with no luck (the voltage and baudrate are correct). The Python script taken from manual: import serial import time # I've tried /dev/ttyS2 and /dev/ttyS4 ser = serial.Serial(port='/dev/ttyS4', baudrate=115200, timeout=0.1) print(ser.name) try: while True: ser.write(b'hello') time.sleep(0.5) except KeyboardInterrupt: …
-
hello guys bluetooth stopped working uname -a Linux pinebook 5.15.76-rockchip64 #22.08.8 SMP PREEMPT Sun Oct 30 10:57:32 CET 2022 aarch64 GNU/Linux dmesg | grep Bluetooth [ 9.863147] Bluetooth: Core ver 2.22 [ 9.863249] Bluetooth: HCI device and connection manager initialized [ 9.863261] Bluetooth: HCI socket layer initialized [ 9.863266] Bluetooth: L2CAP socket layer initialized [ 9.863276] Bluetooth: SCO socket layer initialized [ 9.972130] Bluetooth: HCI UART driver ver 2.3 [ 9.972144] Bluetooth: HCI UART protocol H4 registered [ 9.972147] Bluetooth: HCI UART protocol BCSP registered [ 9.972218…
-
Reputation Points
- 7 replies
- 6.7k views
- 3 followers
-
-
Here is a video of my Orange Pi 5 setup. Hopefully someone finds it helpful!
-
Tried 5 diferrent microSD cards, 3 card readers, multiple redownloads on Mac and Windows. Diferrent power supplies, including 100W charger and 52pi EP-0136 direct 5v supply. No green LED, no LAN communication, no HDMI output. Everything i get is in log (via UART) Please help... i've got no more ideas. DDR Version V1.08 20220617 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB Manufacturer ID:0x1 Samsung CH0 RX Vref:32.7%, TX Vref:1…
-
Reputation Points
- 5 replies
- 4.3k views
- 1 follower
-
-
-
Hi all, I’m new to this whole SBC thing, and I recently got an Orange Pi 5. I first installed the official OS (Ubuntu), where I needed to do into orangepi-config and go into System > Hardware > wifi-ap6275p and enable that to use the official M.2 WiFi dongle. However, I don’t see this option on Armbian. Does it not support it?
-
Reputation Points
- 1 reply
- 3k views
- 1 follower
-
-
Problem 1 i just installed Operating system, and then used coding command sudo add-apt-repository ppa:liujianfeng1994/panfork-mesa sudo add-apt-repository ppa:liujianfeng1994/rockchip-multimedia sudo apt update sudo apt dist-upgrade sudo apt install mali-g610-firmware rockchip-multimedia-config to activate 3d accelerator. but it failed and an error appeared Errors were encountered while processing: /var/cache/apt/archives/mali-g610-firmware_1.0.0-1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) https://ibb.co/0BhLJzm Problem 2 operating system can't mount exfat partition format so I used the following command sud…
-
I have setup the hardware acceleration as explained in the posts, but within Kodi, every now and then I can see the image with "pixelising", and looking in the syslog when this just happened, I can read: Feb 15 16:54:17 orangepi5 kernel: [ 1267.908544] mpp_rkvdec2 fdc48100.rkvdec-core: reset done Feb 15 16:54:17 orangepi5 kernel: [ 1267.908549] mpp_rkvdec2 fdc38100.rkvdec-core: resetting... Feb 15 16:54:17 orangepi5 kernel: [ 1267.908670] mpp_rkvdec2 fdc38100.rkvdec-core: reset done Feb 15 16:54:17 orangepi5 kernel: [ 1268.316705] mpp_rkvdec2 fdc48100.rkvdec-core: resetting... Feb 15 16:54:17 orangepi5 kernel: [ 1268.316855] mpp_rkvdec2 fdc48100.rkvdec-core: …
-
Hi, I've trouble getting 3840x2160 resolution to work. When I try to switch to that resolution the monitor says resolution is 3848x2160 and display is all garbled. 2560x1440 works fine. Also, If I try to login to Gnome (Wayland) I get blank screen and I'm back at the login screen. X11 lets me login to the system. uname -a: Linux lindon 5.10.110-rockchip-rk3588 #trunk.0184 SMP Fri Jan 20 18:24:04 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux I've fetched the latest updates (apt update && apt upgrade) and I've just ran firmware update using armbian-config. Edit: display is connected via usb-c - - > displayport cable.
-
I want to install the usb wifi/bluetooth card drivers but I keep getting an error during compilation. What to do? below code: DKMS make.log for rtl8812au-5.13.6 for kernel 5.10.110-rockchip-rk3588 (aarch64) Tue Jan 10 08:48:19 PM CET 2023 make ARCH=arm64 CROSS_COMPILE= -C /lib/modules/5.10.110-rockchip-rk3588/build M=/var/lib/dkms/rtl8812au/5.13.6/build modules make[1]: Entering directory '/usr/src/linux-headers-5.10.110-rockchip-rk3588' CC [M] /var/lib/dkms/rtl8812au/5.13.6/build/core/rtw_cmd.o CC [M] /var/lib/dkms/rtl8812au/5.13.6/build/core/rtw_security.o CC [M] /var/lib/dkms/rtl8812au/5.13.6/build/core/rtw_debug.o CC [M] /var/lib/dkms/rtl8812au/5.1…
-
Reputation Points
- 5 replies
- 11k views
-
-
I am trying to use a tpm module that attaches to GPIO pins and uses SPI. The manufacturer provides examples that use overlays from Raspbian, and those overlays seem to reference infineon and slb9670, neither of which I can find in armbian source. Anyone know if there is a way to enable SPI tpm?
-
I just installed the most recent nightly image - this one looks like a major update but it broke armbian on my opi 5 1. I had to re-install the mali firmware to get x11/wayland to start - not sure why the update deleted the file 2. I had to re-install the mali-g610-firmware rockchip-multimedia-config packages 3. VLC cannot start the h264 decoder anymore [0000005583627590] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface. Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway. [00000055836b79e0] main playlist: playlist is empty [h264_rkmpp @ 0x7f4cc37630] Failed…
-
Reputation Points
- 1 reply
- 2.8k views
- 1 follower
-
-
I've been trying to implement traffic shaping using tc. But it seems that ingress is not working. I am running Armbian Minimal Server on Orange Pi 5. Running this command: tc qdisc add dev eth0 ingress Will throw an error: Error: Specified qdisc kind is unknown. This has been working for orange pi pc/one armbian. Does the ingress module missing from this build? Can anyone point me to the right direction. Thanks.
-
Reputation Points
- 2 replies
- 3.8k views
- 1 follower
-
-
So recently I flashed Orange Pi OS to SD card, booted from there, updated system, firmware and flashed bootloader to SPI flash. I already had an external HDD with Armbian flashed, and tried to boot from there, but no luck. Afterwards, I tried to boot Armbian from SD card, but I can't boot any system that is not Orange Pi OS (and especifically, it needs to be from SD card, can't also boot from USB even in OPi OS). Tried with different SD cards and USB devices, no luck I believe I need to erase SPI flash in order to boot from SD again, but, how can I do it? Used latest OrangePi OS and Armbian Jammy CLI from 23/01 (stable release)
-
Reputation Points
- 1 reply
- 9.5k views
- 2 followers
-
-
I finally found an official source code on the download page of OrangePI that has a version of wiring pi with support for the Orange PI 5 - unfortunately that code is not on the github of orangepi yet. What would be the best way to get this code and the gpio tool into armbian? Build a PPA and package for that one? I don't mind forking their repo and adding the mods but I'm not familiar with generating debian packages.
-
Reputation Points
- 10 replies
- 25.8k views
- 1 follower
-
-
After upgrading today with "apt update && apt upgrade" I was no longer able to watch videos. mpv player would Segfault, also tried vlc - not working either. Gnome desktop with wayland itself works, only video playback seems to be affected. After rolling back the following packages in liujianfeng1994 repo it started to work again: librockchip-mpp1:arm64 OLD: 1.5.0-1+git221020.d63affb~jammy NEW, causes segfault: 1.5.0-1+git230210.c145c84~jammy The repository no longer has the old version, but I managed to get it back to 1.5.0-1+git221020.d63affb~jammy like this #Find the deb file from cache find /var/cache/apt -name '*librockc…
-
Only sharing what I managed to make working on the Orange Pi5: a Tvheadend server with satellite cards TBS 5527 and TBS 5520se. The rough path I followed: - recompiled the kernel in order to have "Linux tv" as a module (CCONFIG_DVB_CORE=m). This will be replaced by the tbs driver in next steps. - installed TVheadend from the armbian-config - compiled tbs drivers by following standards instructions....but: - had to add a CFGLAGS += -w to avoid some warning stopping the build (Makefile in the v4l directory) - had to disable the creation of the mc.ko (MEDIA_CONTROL) to avoid conflict with kernel built-in module (n…
-
I was happy to find the Orange pi 4 armbian; it ignores raspbian an ubuntu images on sd and boots into android from its EMMC instead. The pi is an orange 4 LTS with 3gb RAM and 16gb EMMC. I have a 2tb crucial SSD attached through the usbc port. It is powered by a 4A supply through the DC port. it's purpose is to be a dedicated mythtv back end; it is wired by ethernet but also has wifi active. armbian-hardware-monitor.log is at https://paste.armbian.com/axayequliz it isn't showing up as a disk, as near as I can tell: the first is the EMMC, I believe, and the second my sandisk car…
-
Reputation Points
- 1 reply
- 3.1k views
- 1 follower
-
-
Just interested if anyway has being able to set this up in Armbian yet? I had a brief look this morning but couldn't get it to work.
-
Reputation Points
- 1 reply
- 2.2k views
- 1 follower
-
-
The Armbian 22.11.4 Jammy with Linux 6.0.10-rockchip64 doesn't have the drivers for a USB Bluetooth bought from Amazon. The kernel gives me these errors at boot: Listing the available bluetooth drivers ls -l /usr/lib/firmware/rtl_bt gives me: while the latest Linux kernel contains the driver: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/rtl_bt Where can I get it or how can I install the bluetooth driver?
-
Processing triggers for initramfs-tools (0.140ubuntu13.1) ... ln: failed to create hard link '/boot/initrd.img-5.10.110-rockchip-rk3588.dpkg-bak' => '/boot/initrd.img-5.10.110-rockchip-rk3588': Operation not permitted update-initramfs: Generating /boot/initrd.img-5.10.110-rockchip-rk3588 update-initramfs: Converting to u-boot format I am getting this error every time I do an apt upgarde. I am running on a 256Gb NVME drive and booting off of it with no problems. So does this error mean it's not actually updating /boot/initrd.img-5.10.110-rockchip-rk3588 ? The third line there makes me think that it just fails with the hard link and then generates the…
-
Reputation Points
- 2 replies
- 6.8k views
- 1 follower
-
-
Hello, I have a problem with mounting a USB HD via fstab. If I enter the HD in the fstab, the system hangs when booting. The problem, USB is not activated yet and will be loaded later. If I remove the HD from fstab, it is automatically mounted under /run/media/USER. However, this must not be mounted under a user, but should be mounted as root. What can I do. Thanks very much
-
I am trying to build the kernel with the standards scripts, but directly on my orange pi 5. The build is stopping at some point because of a Warning issued by the compiler (this is the default behaviour for the compiler who does not tolerate any warning by default). (Some functions in the C code are depreciated, thus a warning is issue) How can I set the CFLAGS so that the kernel build takes it into account during compilation? Thanks.
-
I have an Orange Pi 5 (16GB RAM) running Armbian Jammy with the latest updates installed. I am booting from NVMe and when it boots successfully it runs flawlessly without issue. The problem occurs when I reboot -- the majority of the time it does not boot up successfully. Sometimes when it boots I only see the red light (and no green light), and other times I will see the green light flash like normal, yet the external hard drive does not spin up or mount properly. This results in me needing to power down the Orange Pi 5 and try again. Eventually it will boot up successfully (along with the external HDD) and then everything is good; that is, until the next time I have to …
-
Reputation Points
- 12 replies
- 8.6k views
- 1 follower
-
-
I am trying to compile the Kernel on my PC with the Ubuntu recommended version. I get the error below: arch/arm/dts/rk3128-evb.dtb: Warning (avoid_default_addr_size): Relying on default #address-cells value for /syscon@20008000/usb2-phy@17c arch/arm/dts/rk3128-evb.dtb: Warning (avoid_default_addr_size): Relying on default #size-cells value for /syscon@20008000/usb2-phy@17c FATAL ERROR: Couldn't open "./u-boot.dtb": No such file or directory ./tools/mkimage: Can't read u-boot.itb.tmp: Invalid argument make: *** [Makefile:1053: u-boot.itb] Error 255 Any idea what this could be? It is the first time I am running ./.compile.sh potential…
-
I'm trying to setup LIRC on my OPI5 but I can't find any details on how that would be possible. I checked the kernel configuration and I cannot see any references to LIRC either. The module list has nothing obvious - is this feature completely disabled? Any suggested alternatives?
-
Reputation Points
- 7 replies
- 3.9k views
- 1 follower
-
-
Hello All, Do you also have this kind of messages in syslog ? [ 1601.687044] ------------[ cut here ]------------ [ 1601.687070] WARNING: CPU: 2 PID: 112 at drivers/gpu/drm/rockchip/rockchip_drm_vop2.c:2986 vop2_crtc_load_lut+0x54/0x310 [ 1601.687075] Modules linked in: bnep zstd joydev sch_fq_codel fuse ip_tables ipv6 r8152 panfrost gpu_sched [ 1601.687114] CPU: 2 PID: 112 Comm: kworker/u16:1 Tainted: G W 5.10.110-rockchip-rk3588 #trunk.0184 [ 1601.687117] Hardware name: Orange Pi 5 (DT) [ 1601.687127] Workqueue: events_unbound commit_work [ 1601.687134] pstate: 40c00009 (nZcv daif +PAN +UAO -TCO BTYPE=--) [ 1601.68713…
-
There is no Orange Pi 5 results yet, but we can see already results of RK3588S. https://github.com/ThomasKaiser/sbc-bench/blob/master/results/Sorted-Results.md
-
Reputation Points
- 0 replies
- 2.3k views
- 1 follower
-
-
Hello, finally I have time to play with my OPI5, first thing I tried is to install on USB-C, but the port doesn't seem to work. Then I tried to install using USB3 port, on a ssd drive. The armbian-install utility seems to do the job and after installing the bootloader on mtdblock0 I powered off. At reboot everything is like before: if I remove the sd card the systen won't boot. If I boot with the sd card inserted the root partition is on /dev/mmcblk0p2 First thing that came into my mind is to mount SPI and check if bootloader is ok, but I'm unable to mount it: ~# mount /dev/mtdblock0 /mnt/spi mount: /mnt/spi: wrong fs type, bad optio…
-
I want to install Armbian on Nvme SSD. How do I install on SSD?
-
Reputation Points
- 4 replies
- 4.7k views
-
-
Hi everyone, New to the forum, so apologies if the questions are answered elsewhere, but please redirect me if they are. I have identified a bug in the `armbian-install` script in the current Bullseye Edge image (Dec 19,2022) that prevents it showing NVMe targets in the installation prompt if they don't have a valid filesystem on them. This appears to have been fixed on the 19th of December in this commit (the grep for filesystems was removed from the lsblk command that returns valid partitions). https://github.com/armbian/build/commit/893ed2347d97af574becf69dee1166a1bf933081#diff-8752ea87e0340f217187b70f7b08735d872a14c0467d02a6285222e594db3299L63…
-
Reputation Points
- 1 reply
- 3.3k views
- 1 follower
-
-
Hi, everyone I have 2 rockpi s based boards, and I tried to apply an overlay to one. It actually compiled, I rebooted and the nothing more. I connected serial, e it was on U-boot, spitting this: Spoiler DDR Version V2.06 20211109 CHIP ID = 0x00003308 REG2C: 0x00000034, 0x00000034 In 589MHz DDR3 Col=10 Bank=3 Row=15 Size=512MB OUT: sdram_init finish. Boot1 Release Time: Mar 24 2022 08:28:57, version: 1.36 ROM VER:0x56323030, 19 chip_id:330800,0 ChipType = 0x13, 512 DPLL = 1300 MHz ...nandc_flash_init enter... No.1 FLASH ID:ff ff ff ff ff ff DPLL = 1300 MHz sfc nor id: ff ff ff DPLL = 1300 MHz sfc_nand id: ff ff ff NeedKHz=200KHz,…
-
Reputation Points
- 4 replies
- 5.5k views
- 2 followers
-
-
I know this driver should be part of the recent kernel releases (and definitely avail for 5.10) but I am not sure how/why/where this driver would be in the armbian release. I also did install the firmware files but I don't see the module in the /usr/lib/module section. Any suggestions to build or enable this driver? Thanks
-
Reputation Points
- 11 replies
- 7.9k views
- 1 follower
-
-
Good morning, I cannot seem to get the the newest image (22.08 Bullseye) to boot. I've noticed the disk arrangement is significantly different than the known working image I am using. Here is what I see on the known working image... #fdisk -l Disk /dev/mmcblk0: 28.9 GiB, 30985420800 bytes, 60518400 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: 2A33F1A5-75EA-4125-AC19-16C0435D774A Device Start End Sectors Size Type /dev/mmcblk0p1 64 8063 8000 3.9M Linux filesystem /dev/mmcblk0…
-
Reputation Points
- 4 replies
- 3.8k views
- 1 follower
-
-
Hi there, Just got Orange Pi 5 8GB and have no idea where to begin. I have a microSD card available, but no writer. I had the idea to boot from USB thumbstick and then write the SD card using the port on the Orange Pi 5, then I can boot from SD card. Is this possible? What image and method do I need to follow in order to boot from a simple 32GB USB Sandisk thumbstick? Thank you!
-
Reputation Points
- 4 replies
- 5.4k views
- 1 follower
-
-
I saw that you now have a stable release of armbian for opi5. I installed Armbian 23.02.0-trunk.0112 Bullseye a week ago. Now I'm wondering if it is possible to switch back to the stable version without reinstalling the system. The OPI is now running in production and I have several containers running on it. This is what I tried -> armbian-config -> system -> nightly after that back to stable -> armbian-config -> system -> stable ->armbian-config -> system -> other -> linux-image-legacy-rockchip-rk3588=22.11.4 But after login I always see: Welcome to Armbian 23.02.0-trun…
-
Reputation Points
- 1 reply
- 4k views
- 1 follower
-
-
I did a bit of reading - to prevent ubuntu packages to update the rockchip optimized packages, you need to pin the packages. There is a simple way to do that. 1. Create a file called rockchip-multimedia-ppu in /etc/apt/preferences.d with Package: * Pin: release o=LP-PPA-liujianfeng1994-rockchip-multimedia Pin-Priority: 600 2. Create a file called panfork-mesa-ppu in /etc/apt/preferences.d with Package: * Pin: release o=LP-PPA-liujianfeng1994-liujianfeng1994-panfork-mesa Pin-Priority: 600 You can verify that the apt configuration is working correctly with sudo apt policy chromium-browser which should return chrom…
-
Reputation Points
- 5 replies
- 6.9k views
- 1 follower
-
-
Hi, I'll install OpenMediaVault and Nextcloud on a tinkerboard and I would like to know if there is any advantage on run system on SATA / USB in this case and if it is possible to do this on tinkerboard since it was not clear for me on the docs. Thank you
-
Reputation Points
- 1 reply
- 3.7k views
- 1 follower
-
-
Has anyone tried GPIO access on the latest armbian? I noticed that the custom wiringPi https://github.com/orangepi-xunlong/wiringOP.git doesn't compile on armbian. It is missing GPIO constants.
-
How do I get DVB drivers to work. I have a Technotrend TT Connect S2-3650-CI. All DVB drivers are missing
-
I found this amazing page https://linux-sunxi.org/Sunxi-Cedrus#VLC that explains alot on VLC and hardware accelleration but I cannot clearly figure out if my playback is using hardware acceleration. I did follow all the steps to optimize chromium with the ppu sources - chromium doesn't work well yet for me - so not sure if that install worked as expected. My playback of h264 in VLC is super smooth but I have around 20-35% cpu usage (1080p videos) - I know h264 is more demanding than AV1 but someone reported AV1 with 15% CPU usage and 4k. Is there anything I can do to make sure the hardware acceleration is working (aka the VA-API is used)?
-
Reputation Points
- 2 replies
- 5.2k views
- 1 follower
-
-
I am attempting to install the file Armbian_23.02.0-trunk.0112_Orangepi5_jammy_legacy_5.10.110_cinnamon_desktop.img from https://www.armbian.com/orangepi-5/ but the installation hangs at the point where the root password should be entered. The same happens with the file Armbian_23.02.0-trunk.0112_Orangepi5_jammy_legacy_5.10.110_minimal.img. If i use the file Armbian_22.11.3_Orangepi5_jammy_legacy_5.10.110_cinnamon_desktop.img from the Github archive the installation completes. I have tried to raise a bug but the only solution for not booting are hardware and the installation has not progressed far enough to enter any commands. Any assistance welcomed.
-
Hello, I would like to know more informations about this test made with the Asus XG-C100C Network Adapter or, generally, how to optimize the speed from a 10GbE PCIe Network Adapter in the RockPro64. Which version to use of Armbian and how to get that version to have so good performances? Which version of the Adapter driver to use? Were the drivers included in the Kernel or did you use the Asus driver recompiled? I would be very grateful if you will help me. Thank you.
-
Trying to interface with a Raspbee II but the uarts dont seem to function, could this be correct?
-
Not sure if the rolling release includes the UART dtb yet, but when I build my own image (jammy xfce kernel 5.10.110) I don't have the UART dtbs in /boot/dtb/rockchip/overlay/ . As a result, I couldn't add uart0-m2 to /boot/armbianEnv.txt and get /dev/ttyS0 when I was following the official user manual to enable UART. After some researching I managed to solve this by copying the dtb file from orange pi's official ubuntu image to /boot/overlay-user and enable UART with user_overlays=rk3588-uart0-m2 in armbianEnv.txt . Rebooted and it works. However, I suppose it would be better to include the dts files in kernel patches? I'm posting this because I don't know what…
-
After some days of uptime Zram usage is 100% https://paste.armbian.com/fecegemiwe What can I do with it?
-
Reputation Points
- 6 replies
- 5.1k views
- 1 follower
-
